2026 Latest Workday Workday-Pro-Time-Tracking Real Exam Dumps PDF [Q27-Q48]

Share

2026 Latest Workday Workday-Pro-Time-Tracking Real Exam Dumps PDF

Workday-Pro-Time-Tracking Exam Dumps, Workday-Pro-Time-Tracking Practice Test Questions


Workday Workday-Pro-Time-Tracking Exam Syllabus Topics:

TopicDetails
Topic 1
  • Time Entry and Validation: Focuses on how workers enter time, how entries are validated, and the rules that ensure accuracy and compliance.
Topic 2
  • Time Off and Leave Integration: Describes how time tracking integrates with time off plans, leave requests, and absence management processes.
Topic 3
  • Time Calculation and Processing: Explains how Workday calculates time, including rules for overtime, shifts, and processing of recorded hours.
Topic 4
  • Reporting and Auditing: Covers how to generate reports, monitor time data, and audit entries to ensure accuracy and compliance with policies.
Topic 5
  • Time Tracking Fundamentals: Covers the core concepts of Workday time tracking, including basic setup, terminology, and how time is captured within the system.

 

NEW QUESTION # 27
You have configured a time calculation to identify when a worker has reached or exceeded a number of consecutive days worked. You must now configure a time calculation for hours worked over 8 hours on the seventh consecutive day.
How do you assign priority to ensure the time is processed correctly?

  • A. Assign a higher priority to the time calculation for hours worked on the seventh consecutive day.
  • B. Workday will assign priority automatically based on the Time Tracking Eligibility Rule.
  • C. Assign both time calculations to a Time Calculation Group ensuring the appropriate workers are eligible.
  • D. Workday will review the two time calculations and assign the appropriate priority automatically.

Answer: A

Explanation:
The correct answer is C. Assign a higher priority to the time calculation for hours worked on the seventh consecutive day.
In Workday Time Tracking, calculation priority determines the order in which time calculations are processed . When multiple calculations depend on each other, the prerequisite calculation must execute first so that its results can be used by subsequent calculations. In this scenario, the first time calculation identifies when a worker reaches a certain number of consecutive days worked . The second calculation specifically evaluates hours worked over 8 hours on the seventh consecutive day .
For the second calculation to work correctly, Workday must already know that the worker has reached the seventh consecutive day threshold . Therefore, the calculation that evaluates hours beyond 8 on that seventh day must run after the initial consecutive-day identification calculation . This is achieved by assigning it a higher priority value , ensuring it processes later in the calculation sequence.
Options A and B are incorrect because Workday does not automatically determine priority between time calculations. Administrators must configure priorities manually. Option D is also incorrect because Time Calculation Groups control eligibility and grouping , not execution order.
Thus, assigning a higher priority to the seventh-day overtime calculation ensures the correct processing sequence and accurate tagging of hours.


NEW QUESTION # 28
What report do you run to ensure that a period schedule is assigned to a worker?

  • A. View Period Schedule
  • B. Audit - Workers with Multiple Time Period Schedules
  • C. Time Entry Period Schedule Review
  • D. View Worker's Time Eligibility

Answer: D

Explanation:
The correct answer is D. View Worker's Time Eligibility .
In Workday Time Tracking, when you want to confirm whether a specific worker has been assigned a period schedule , the most direct report is View Worker's Time Eligibility . This report is used to review which Time Tracking components a worker is currently eligible for and receiving, including items such as time entry templates, approval templates, and period schedules . Since the question is focused on verifying assignment to a worker , this worker-level eligibility view is the most appropriate choice.
The other options do not fit the requirement as well. Audit - Workers with Multiple Time Period Schedules is an exception report used to identify workers who have more than one schedule, not to simply confirm that a worker has one assigned. View Period Schedule lets you inspect the schedule definition itself, but it is not the best worker-specific confirmation tool. Time Entry Period Schedule Review may sound related, but it is not the standard report used to validate a worker's eligibility-based assignment in the same direct way.
So, if your goal is to ensure that a particular worker is assigned the correct period schedule, the correct report is View Worker's Time Eligibility .


NEW QUESTION # 29
Refer to the following scenario to answer the question below.

Amanda Baker is eligible for the following calculations: Daily OT > 8 regular hours in a day, Daily double time > 12 regular hours in a day, Weekly OT > 40 regular hours in a week.
What are the calculated hours for Friday?

  • A. 10 Weekly OT
  • B. 2 Daily OT and 8 Weekly OT
  • C. 10 Regular
  • D. 8 Regular and 2 Daily OT

Answer: D

Explanation:
The correct answer is C. 8 Regular and 2 Daily OT . In Workday Time Tracking, daily calculations are evaluated based on the hours entered for that specific day, while weekly overtime is applied only after total eligible regular hours for the week exceed the weekly threshold.
Let us total Amanda's regular hours before Friday. On Monday , she worked 10 hours, which results in 8 Regular + 2 Daily OT . On Tuesday , she worked 15 hours, which results in 8 Regular + 4 Daily OT + 3 Daily Double Time . On Wednesday , she worked 6 Regular hours. On Thursday , she worked 8 Regular hours. That gives her a total of 30 regular hours through Thursday.
On Friday , Amanda worked 10 hours . Applying the daily overtime rule, the first 8 hours are regular and the remaining 2 hours become Daily OT . At that point, her total regular hours for the week become 38 (30 +
8), which is still below the weekly overtime threshold of 40 . Because weekly overtime has not yet been reached on Friday, none of Friday's hours convert to Weekly OT.
Therefore, Friday's calculated hours are 8 Regular and 2 Daily OT .


NEW QUESTION # 30
You have configured a Time Calculation that tags all hours reported on either Saturday or Sunday as Weekend Premium hours. A second time calculation tags all hours worked over 8 hours on Saturday or Sunday as double time.
What task do you use to verify that these two time calculations are prioritized correctly?

  • A. View Time Calculation Group
  • B. Maintain Time Accumulator Threshold Rule Priorities
  • C. Maintain Time Calculation Tags
  • D. Maintain Time Calculation Priorities

Answer: D

Explanation:
The correct answer is D. Maintain Time Calculation Priorities .
In Workday Time Tracking, when multiple time calculations interact with each other, the order of execution is extremely important. In this example, one calculation tags all Saturday and Sunday hours as Weekend Premium , while another tags hours over 8 on those same days as double time . Since both calculations may evaluate the same time, you must confirm that they run in the correct sequence so the desired tags are applied properly and downstream results are accurate.
The task used specifically to review and manage the execution order of time calculations is Maintain Time Calculation Priorities . This is where Workday administrators verify whether one calculation runs before or after another based on its configured priority value. If the priorities are incorrect, calculations may not tag or replace hours as expected.
The other options are not the correct tool for this purpose. View Time Calculation Group helps review grouped calculations, but not the priority maintenance itself. Maintain Time Calculation Tags is used for tag configuration, not sequencing. Maintain Time Accumulator Threshold Rule Priorities applies to threshold rule priorities, which is a different configuration area and not the general task for validating calculation order between standard time calculations.
Therefore, the correct task is Maintain Time Calculation Priorities .


NEW QUESTION # 31
What worker population will an administrator commonly use Mass Submit Time for?

  • A. Hours-only workers using micro-edit.
  • B. Project workers using enter time by type.
  • C. Salaried workers adjusting their auto-fill from schedule hours.
  • D. In/Out workers who use check-in/check-out functionality.

Answer: C

Explanation:
The correct answer is A. Salaried workers adjusting their auto-fill from schedule hours .
In Workday Time Tracking, Mass Submit Time is most commonly used for worker populations whose time is largely predictable and auto-generated , especially salaried workers who use auto-fill from schedule hours . These workers often have standard scheduled hours and may only make small adjustments before time needs to be submitted. Because their time is generally consistent, administrators can efficiently submit time in bulk for many workers at once, which reduces manual effort and supports period-end processing.
This function is less appropriate for populations with more variable or punch-based time entry. Hours-only workers using micro-edit may still require individual changes that make bulk submission less common. In
/Out workers using check-in/check-out functionality rely on punch data and break patterns, so their entries often need closer review before submission. Project workers using enter time by type usually allocate time across projects, tasks, or worktags, making their time more complex and less suitable for broad mass submission.
Mass Submit Time is most valuable when time entry follows a stable pattern and does not require frequent day-by-day validation. That is why salaried workers with auto-fill from schedule hours are the most common population for this administrative action.


NEW QUESTION # 32
The tenant includes a daily overtime calculation (regular hours > 8) with the priority of USA0045. You need to configure a daily double time calculation (regular hours > 12).
What priority should you assign to the Daily Double Time calculation so it calculates before the Daily Overtime?

  • A. USA0045
  • B. USA0050
  • C. USA0040
  • D. USA0055

Answer: C

Explanation:
The correct answer is A. USA0040 .
In Workday Time Tracking, time calculation priority determines the order in which calculations are processed. A calculation with a lower priority value runs before a calculation with a higher value. Since the existing Daily Overtime calculation has a priority of USA0045 , any new calculation that must run earlier needs a priority number lower than 0045.
Because the organization wants the Daily Double Time rule for hours greater than 12 to calculate before Daily Overtime, the proper priority is USA0040 . This ensures that the double time logic evaluates first and can correctly identify the hours that should receive double time treatment before the broader overtime calculation processes the remaining qualifying hours.
The other options are incorrect for the following reasons. USA0045 would place the new calculation at the same priority as Daily Overtime, which does not ensure the correct processing sequence. USA0050 and USA0055 are higher values, so they would run after the overtime calculation, which could lead to incorrect tagging or pay treatment of hours above 12.
In Workday, correct priority sequencing is critical whenever multiple calculations interact, especially for overtime and premium scenarios. Therefore, the correct priority is USA0040 .


NEW QUESTION # 33
Refer to the following scenario to answer the question below.


The All Time Calculations task shows the following calculations and priorities:

What is the appropriate priority for the time calculation that creates the 1-Holiday Double Time tag for hourly workers?

  • A. USA_HRL_45
  • B. USA_HRL_40
  • C. USA_SAL_10
  • D. USA_HRL_55

Answer: B

Explanation:
The correct answer is B. USA_HRL_40 .
In Workday Time Tracking, time calculation priorities control the sequence in which calculations run . Lower priority numbers run first, and higher numbers run later. The calculation Weekly OT > 40 Hours has priority USA_HRL_50 and explicitly includes the tag "1-Holiday Double Time." This means the system expects the Holiday Double Time tag to already exist before the Weekly OT calculation executes .
Therefore, the calculation that generates the 1-Holiday Double Time tag must run before priority 50 so that the Weekly OT calculation can recognize those tagged hours when it evaluates overtime eligibility.
Looking at the options:
* USA_SAL_10 is used for salaried logic and not appropriate for hourly worker calculations.
* USA_HRL_55 would run after Weekly OT > 40 Hours, which is incorrect.
* USA_HRL_45 would run before 50, but the standard Workday configuration typically places holiday or premium tagging calculations earlier in the sequence so downstream overtime rules can reference them consistently.
Thus USA_HRL_40 is the most appropriate priority because it executes before Weekly OT > 40 Hours (USA_HRL_50) while still allowing earlier calculations such as Night Shift or other hourly rules to run first if needed.
This ensures that Holiday Double Time hours are correctly tagged before weekly overtime calculations evaluate total hours and remove or replace the Regular tag where necessary.


NEW QUESTION # 34
You have configured a Time Entry Code and assigned a default calculation tag of Callback Guaranteed Time.
What happens when a worker reports time using this Time Entry Code?

  • A. The hours are paid at time and a half the worker's hourly rate.
  • B. The hours are tagged to the default Time Entry Code identified in the Time Entry Template.
  • C. The hours are tagged with the Time Calculation Tag applied in the worker's Work Schedule Calendar.
  • D. The hours are tagged with the Callback Guaranteed Time Calculation Tag.

Answer: D

Explanation:
The correct answer is D. The hours are tagged with the Callback Guaranteed Time Calculation Tag .
In Workday Time Tracking, when a default calculation tag is assigned to a Time Entry Code , that tag is automatically applied to time reported with that code unless other calculation logic changes the outcome. This means the time entry itself carries the designated calculation tag into the time calculation process. In this case, if the Time Entry Code has a default calculation tag of Callback Guaranteed Time , then any hours entered using that code will be tagged with Callback Guaranteed Time .
This setup is commonly used to ensure specific kinds of time are consistently identified for later calculation logic, such as guaranteed callback minimums, premiums, or special pay treatment. The tag itself does not automatically determine the pay rate; instead, it marks the hours so the relevant time calculations can recognize and process them correctly.
Option A is incorrect because the worker's Work Schedule Calendar does not control the default calculation tag placed on a Time Entry Code. Option B is incorrect because the Time Entry Template does not retag the reported time to another default code in this way. Option C is incorrect because assigning a calculation tag alone does not directly guarantee payment at time and a half; pay outcomes depend on downstream calculation and payroll configuration.


NEW QUESTION # 35
Refer to the following scenario to answer the question below.
You have received a requirement to create a set of Time Tracking Components for workers who have the following attributes:
* Time Type = Salary
* Country = United States
* Supervisory Organization = Facilities Group
A worker that you are testing is already assigned to a template. During testing, this worker, who meets all of the newly defined criteria, is not assigned to the new Time Entry Template.
How do you troubleshoot this issue?

  • A. Run the Audit - Workers with Multiple Work Schedule Calendars to confirm that there are overlapping assignments.
  • B. Run the Audit - Workers with Multiple Time Entry Templates report to confirm that there are overlapping assignments.
  • C. Run the All Time Entry Templates report to confirm that there are overlapping assignments.
  • D. Run the View Worker Time Eligibility by Organization to confirm that there are overlapping assignments.

Answer: B

Explanation:
The correct answer is C. Run the Audit - Workers with Multiple Time Entry Templates report to confirm that there are overlapping assignments .
In Workday Time Tracking, a worker should generally be eligible for only one active time entry template at a time . If a worker already has an existing template assignment and also meets the criteria for a newly created template, the most common issue is overlapping eligibility between templates. When this happens, Workday administrators need an audit tool that specifically identifies workers who match more than one template at the same time.
The Audit - Workers with Multiple Time Entry Templates report is built for exactly this troubleshooting scenario. It helps confirm whether the worker is being picked up by multiple eligibility rules and whether an overlap is preventing the expected result or creating assignment ambiguity. This makes it the most accurate report to run when validating time entry template setup.
Option A only lists templates and does not directly expose worker-level overlap issues. Option B focuses on work schedule calendars , which is a different setup area and not related to time entry template conflicts.
Option D may provide useful eligibility information, but it is not the primary audit report used to detect overlapping template assignments.
Therefore, the best troubleshooting step is C .


NEW QUESTION # 36
To prevent a worker from entering time on a holiday, which two business objects can you reference to create a critical validation to remind workers of this restriction?

  • A. Worker and Time Day
  • B. Time Day and Time Shift
  • C. Time Day and Time Block
  • D. Worker and Time Block

Answer: C

Explanation:
The correct answer is D. Time Day and Time Block .
In Workday Time Tracking, a validation that prevents or warns against time entry on a holiday must evaluate both the date context and the entered time record . The Time Day business object is used to determine day- level attributes, such as whether the date is a holiday. The Time Block business object is used to evaluate the actual time entry being submitted or edited. Together, these two objects give Workday the information it needs to create a critical validation that checks whether a worker is trying to enter time on a holiday.
This pairing is appropriate because the holiday condition itself exists at the day level , while the transaction being controlled is the time block . A critical validation can then be configured to trigger when a time block is entered on a day identified as a holiday.
The other options are less appropriate. Worker may be useful for worker-specific eligibility or attributes, but it does not provide the direct day-and-entry combination needed for this specific validation. Time Shift is related more to scheduled shift context and is not the primary business object for validating holiday entry against submitted time blocks.
Therefore, to create a critical validation that reminds or restricts workers from entering time on a holiday, the correct business objects are Time Day and Time Block .


NEW QUESTION # 37
The time tracking administrator asks you to confirm that workers are reporting their scheduled hours each day.
What type of time calculation will you use?

  • A. Shift Differential
  • B. Minimum Daily
  • C. Standard Overtime
  • D. Time Block Conditional

Answer: B

Explanation:
The correct answer is B. Minimum Daily .
In Workday Time Tracking, a Minimum Daily time calculation is used when the business needs to compare the amount of time a worker reported in a day against an expected minimum threshold. When the requirement is to confirm that workers are reporting their scheduled hours each day , this is essentially a daily minimum- hours validation and calculation scenario. Workday uses Minimum Daily logic to evaluate whether reported time meets the expected number of hours for that day and to identify shortfalls when the worker reports less than the required amount.
This calculation type is commonly used in situations where organizations need to ensure daily schedule compliance, guaranteed minimums, or identify underreported time based on work expectations. Since the question is about confirming scheduled daily hours, Minimum Daily is the best fit because it focuses directly on the comparison of daily reported hours against the expected daily amount.
The other options are not correct for this purpose. Shift Differential is used for premium treatment based on shift timing, such as evening or night work. Time Block Conditional evaluates conditions on individual time blocks, but it is not the standard calculation type for checking whether daily scheduled hours were fully reported. Standard Overtime applies to hours exceeding thresholds, not to verifying whether minimum scheduled hours were entered.
So the correct calculation type is Minimum Dai ly.


NEW QUESTION # 38
Refer to the following scenario to answer the question below.
You are reviewing time for a worker. The worker has reported hours for the seventh consecutive day and the hours are calculating as configured. This week, the worker reported 11 hours on the seventh consecutive day worked. This worker is eligible for double-time on all hours worked over 8 hours on the seventh consecutive day; however, all 11 hours are tagged as seventh consecutive day hours.
To solve this issue, you determine that the worker should be made eligible for a specific time tracking component.
What time tracking component should this worker be eligible for?

  • A. Time Entry Template
  • B. Time Calculation Tag
  • C. Time Calculation Group
  • D. Time Code Group

Answer: C

Explanation:
The correct answer is C. Time Calculation Group .
In Workday Time Tracking, a Time Calculation Group is the component that bundles together the time calculations that apply to a specific worker population. If a worker should receive special overtime or double- time logic-such as double time for hours over 8 on the seventh consecutive day -the worker must be eligible for the appropriate Time Calculation Group that contains those rules.
In this scenario, the worker's time is being tagged as seventh consecutive day hours, but the expected split into double time after 8 hours is not occurring. That strongly suggests the worker is not currently eligible for the calculation group that includes the seventh consecutive day double-time calculation . Making the worker eligible for the correct calculation group ensures Workday runs the additional rule needed to reclassify hours over the threshold.
The other options are not correct for this purpose. A Time Entry Template controls how time is entered, not how overtime logic is calculated. A Time Calculation Tag is a result or identifier used by calculations, not an eligibility-based worker component. A Time Code Group organizes time entry codes, but it does not determine whether complex overtime calculations are applied.
Therefore, the worker should be made eligible for the appropriate Time Calculation Group


NEW QUESTION # 39
What security group assignment does Workday use to run the Mass Operations Management (MOM) function?

  • A. Time Tracking Administrator
  • B. Manager
  • C. Business Process Administrator
  • D. Payroll Partner

Answer: A

Explanation:
The correct answer is D. Time Tracking Administrator .
In Workday Time Tracking, the Mass Operations Management (MOM) function is used for administrative actions that affect time tracking data in bulk. Because this is a specialized time administration capability, Workday assigns access to this function through the Time Tracking Administrator security role. This role is intended for users who manage time tracking setup, monitor processing, perform corrections, and run administrative operations across groups of workers or time periods.
Mass operations can have broad impact, so Workday restricts them to a role specifically aligned with time administration responsibilities. That is why the MOM function is not typically assigned to more general roles such as Manager or Payroll Partner . Managers are focused on supervising workers and approving time, while Payroll Partners are responsible for payroll-related processes rather than direct time administration tools. Business Process Administrator handles business process maintenance and oversight, but MOM in this context is tied specifically to Time Tracking administration.
Since the question asks which security group assignment Workday uses to run MOM in the Time Tracking area, the most accurate answer is Time Tracking Administrator . This role provides the correct level of access and responsibility for performing large-scale time tracking administrative operations safely and appropriately.


NEW QUESTION # 40
What restrictions apply to the Adjust Calculated Time task?

  • A. Time off is eligible to be adjusted.
  • B. Adjustments are submitted only during unlocked periods.
  • C. A worker cannot adjust their own calculated time.
  • D. Adjusted time will continue to be calculated by Workday just like normal time.

Answer: C

Explanation:
The correct answer is C. A worker cannot adjust their own calculated time .
In Workday Time Tracking, the Adjust Calculated Time task is an administrative function used to correct or override calculated time results, such as overtime or premium outcomes, when the automatically generated result needs manual intervention. Because this task can directly change calculation outcomes that affect pay, compliance, and reporting, Workday restricts it from being performed by the worker on their own time.
Instead, it is intended for authorized administrative roles, such as a time tracking administrator or another appropriately secured user.
Option A is incorrect because time off is not generally the focus of the Adjust Calculated Time task; this task is used for calculated worked-time results, not for adjusting absence or time-off entries in the same way.
Option B is not the best restriction stated here because period locking rules relate to broader time-entry administration and do not define the core restriction of who can perform the task. Option D is incorrect because once calculated time is manually adjusted, it is no longer simply treated the same as fully system- calculated normal time; the adjustment reflects an administrative override.
Therefore, the key restriction that applies is that a worker cannot adjust their own calculated time , making C the correct answer.


NEW QUESTION # 41
A worker is eligible for a validation group which only contains the validations Unsubmitted Time and Cannot Work on a Holiday . You create a new validation, Cannot Work on Sunday , and you do not place it in a validation group.
What validations will the worker be eligible for?

  • A. Only the new validation.
  • B. Only the validations in the validation group.
  • C. All three of the validations.
  • D. It depends on the eligibility built into the new validation.

Answer: B

Explanation:
The correct answer is B. Only the validations in the validation group .
In Workday Time Tracking, validations are typically assigned to workers through Validation Groups , not simply by creating the validation itself. A worker becomes subject to the validations contained in the group for which they are eligible. In this scenario, the worker is eligible for a validation group that contains only Unsubmitted Time and Cannot Work on a Holiday . Since the new validation, Cannot Work on Sunday , was not added to any validation group , it is not delivered to the worker through eligibility.
This is a key setup concept in Workday: creating a validation does not automatically make workers subject to it. The validation must be included in the appropriate Validation Group , and the worker must be eligible for that group. Because the new Sunday validation was left outside the group, the worker continues to receive only the validations already included in the assigned group.
Option A is incorrect because the new validation alone is not independently assigned. Option C is incorrect because validation eligibility is not applied in isolation here; group membership drives delivery. Option D is incorrect because the worker will not receive the third validation unless it is added to a validation group for which they are eligible.
Therefore, the worker is eligible for only the validations in the validation group


NEW QUESTION # 42
An organization wants to ensure that 12:00 AM is the start time for each day.
What function should they use?

  • A. Day Breaker Divides
  • B. Bi-Weekly Calculation Start Date
  • C. Day Breaker
  • D. Work Week Start Day

Answer: C

Explanation:
The correct answer is A. Day Breaker .
In Workday Time Tracking, the Day Breaker defines the point at which one workday ends and the next workday begins for time entry and time calculation purposes. If an organization wants each day to start exactly at 12:00 AM , then the Day Breaker should be set to 12:00 AM . This ensures that time worked before midnight belongs to the prior day, and time worked from midnight onward belongs to the new day.
This setting is especially important for workers who work overnight shifts or whose time spans across calendar dates. Without the correct Day Breaker, hours may be assigned to the wrong workday, which can affect daily totals, overtime calculations, schedule comparisons, and payroll results. Workday uses this function specifically to determine the daily boundary for reported time.
The other options are not correct for this requirement. Work Week Start Day controls the first day of the week, not the daily start time. Day Breaker Divides relates to how calculations may split time around the Day Breaker, but it does not establish the daily boundary itself. Bi-Weekly Calculation Start Date is used for bi-weekly calculation patterns and has nothing to do with the start time of each day.
So the correct function is Day Breaker .


NEW QUESTION # 43
When creating a work schedule calendar, what does the Work Week Start Day field default to?

  • A. Friday
  • B. Monday
  • C. Saturday
  • D. Sunday

Answer: B

Explanation:
The correct answer is D. Monday .
In Workday Time Tracking, when you create a Work Schedule Calendar , the Work Week Start Day field defaults to Monday . This default is important because the work week start day influences how Workday organizes weekly scheduling, displays calendar weeks, and applies certain weekly time calculations. Since many organizations structure operational or reporting weeks from Monday through Sunday, Workday uses Monday as the standard default starting point unless configuration is intentionally changed.
This field matters because it helps define how a worker's schedule is grouped across the week for planning and tracking purposes. It can affect how managers and administrators interpret weekly patterns, shift rotations, and time-based reporting. Although organizations may later adjust the work week start day based on business requirements, regional practices, or union rules, the initial default value during setup remains Monday .
The other answer choices are incorrect because they are not the standard default delivered in the initial calendar setup. While a company could choose Friday , Saturday , or Sunday for a custom business need, those are configured exceptions rather than the default system behavior.
So, for a newly created Work Schedule Calendar in Workday Time Tracking, the Work Week Start Day defaults to Monday .


NEW QUESTION # 44
What type of field is used to define Time Tracking Calculation priorities?

  • A. Date
  • B. Lookup
  • C. Boolean
  • D. Alpha-Numeric

Answer: D

Explanation:
The correct answer is B. Alpha-Numeric .
In Workday Time Tracking, calculation priorities are defined using an alpha-numeric field . This allows organizations to create priority values that include both letters and numbers , such as USA0045 or USA_HRL_50 , depending on how the tenant's naming convention is structured. Workday uses these values to control the order in which time calculations run, with lower priority values generally processing before higher ones.
An alpha-numeric format is useful because it provides flexibility. The alphabetic portion can identify a country, worker group, pay group, or processing category, while the numeric portion establishes the sequence.
This helps administrators organize time calculations in a way that is both readable and scalable, especially when many calculation rules exist across different populations.
The other options are incorrect because they do not support how Workday defines calculation priorities. A Lookup field would reference another object rather than store a structured priority code directly. A Boolean field only supports true/false values, which would not be enough to define processing order. A Date field is designed for calendar-based values and has no role in sequencing time calculations.
Therefore, the field type used to define Time Tracking Calculation priorities in Workday is Alpha-Numeric .


NEW QUESTION # 45
Refer to the following scenario to answer the question below.

You must create a new time calculation to determine when workers work more than 20 hours in one week with the 1-Supervisor Premium tag.
What is the appropriate priority for the new calculation?

  • A. USA_HRL_70
  • B. USA_HRL_10
  • C. USA_HRL_60
  • D. USA_HRL_30

Answer: A

Explanation:
The correct answer is C. USA_HRL_70 . In this scenario, the new calculation is designed to evaluate hours that already have the 1-Supervisor Premium tag. In the report, the existing 1-Supervisor Premium calculation has a priority of USA_HRL_60 . In Workday Time Tracking, when a calculation depends on the output of another calculation, it must run after the earlier calculation has already assigned its tag. Otherwise, the new calculation would run too soon and would not find the tagged hours it is supposed to evaluate.
Because this new weekly calculation is specifically looking for hours with the 1-Supervisor Premium tag that exceed 20 hours in a week , it must be placed at a priority after USA_HRL_60 . Among the answer choices, USA_HRL_70 is the correct next priority that ensures proper sequencing.
The other options are not appropriate. USA_HRL_30 and USA_HRL_10 would run before the Supervisor Premium calculation, so the required tag would not yet exist. USA_HRL_60 is the same priority as the existing calculation and does not clearly guarantee the dependent logic runs afterward. Therefore, the best and correct priority for the new calculation is USA_HRL_70 .


NEW QUESTION # 46
You need to provide managers the ability to manage time, whether or not it is submitted, for all of their workers in a consolidated view.
What report provides this information?

  • A. Time Administrator Home Worklet
  • B. Edit and Approve Time
  • C. Review Time
  • D. View Worker's Time Eligibility

Answer: B

Explanation:
The correct answer is C. Edit and Approve Time .
In Workday Time Tracking, Edit and Approve Time gives managers a consolidated view of their workers' time and allows them to take action whether the time has already been submitted or not. This is an important distinction because managers often need a single place to review, correct, edit, and approve time across their team without switching between separate worker records or waiting for all entries to be formally submitted.
This report or task is designed for operational time management. It enables managers to see worker time in one combined interface, helping them identify missing entries, incorrect hours, and pending approvals efficiently. Because the question specifically mentions the need to manage time for all workers in a consolidated view , including time that may not yet be submitted, Edit and Approve Time is the best match.
The other options are not correct for this need. Review Time is more limited and generally focuses on viewing time rather than providing the same management and approval functionality across submitted and unsubmitted entries. Time Administrator Home Worklet is an administrative landing page, not the manager- facing consolidated report for team time management. View Worker's Time Eligibility is used to review assigned time tracking components, not worker time entry details.
Therefore, the correct answer is C. Edit and Approve Time .


NEW QUESTION # 47
In what time-related business object can you find a True/False condition calculated field for Day of Week = Sunday?

  • A. Time Day
  • B. Time Week
  • C. Time Block
  • D. Worker

Answer: A

Explanation:
The correct answer is A. Time Day .
In Workday Time Tracking, when a calculation needs to evaluate a specific day-level attribute such as whether the day is Sunday , the appropriate business object is Time Day . This is because the concept of Day of Week belongs to a single calendar day, and Workday stores day-based evaluation logic on the object that represents an individual day in the time calculation framework.
A True/False condition calculated field for something like Day of Week = Sunday is used when time calculations need to identify specific days for purposes such as weekend premiums, seventh-day rules, special overtime treatment, or other schedule-driven logic. Since the condition is testing one day at a time, Time Day is the correct and most precise object.
The other options are less appropriate. Time Week is used when calculations need to look across an entire week, such as weekly totals or weekly thresholds. Time Block focuses on individual reported or generated entries, not the calendar-day attribute itself. Worker is used for worker-specific attributes and eligibility logic, not for determining the day of week within time calculations.
So, for a True/False calculated field checking whether the day is Sunday, the correct time-related business object is Time Day .


NEW QUESTION # 48
......

PDF (New 2026) Actual Workday Workday-Pro-Time-Tracking Exam Questions: https://www.pass4cram.com/Workday-Pro-Time-Tracking_free-download.html

Dumps Moneyack Guarantee - Workday-Pro-Time-Tracking Dumps UpTo 90% Off: https://drive.google.com/open?id=1DIvgiP5oJLNncT3wHe5CW01cFsNhfEpY