Pass 350-801 Exam with Updated 350-801 Exam Dumps PDF 2021
350-801 Exam Dumps - Free Demo & 365 Day Updates
Target Audience for 350-801 Test
The candidates who should take the Cisco CLCOR 350-801 exam are formed from network administrators and engineers as well as systems engineers. Moreover, this test plus one concentration exam of your choice is suitable for the students who are interested in preparing to obtain the CCNP Collaboration designation. As you remember, this exam alone is also necessary to obtain the Cisco Certified Specialist – Collaboration Core validation. Finally, by acing 350-801 alongside the CCIE Collaboration v3.0 test, candidates will manage to get the CCIE Collaboration certification.
Difficulty in Attempting Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
There are two main types of resources for preparation of certification exams first there are the study guides and books that are detailed and suitable for building knowledge from ground up then there are video tutorials and lectures that can somehow ease the pain of through study and are comparatively less boring for some candidates yet these demand time and concentration from the learner.
Smart Candidates who want to build a solid foundation in all exam topics and related technologies usually combine video lectures with study guides to reap the benefits of both but there is one crucial preparation tool as often overlooked by most candidates the practice exams. CISCO 350-801 practice tests and CISCO 350-801 practice exams are a great way to prepare for this exam. Practice exams are built to make students comfortable with the real exam environment. Statistics have shown that most students fail not due to that preparation but due to exam anxiety the fear of the unknown.
Pass4cram expert team recommends you to prepare some notes on these topics along with it don’t forget to practice 840-450 Exam dumps which had been written by our expert team, Both these will help you a lot to clear this exam with good marks.
Certification Path for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
This course will help you:
- Configure and troubleshoot collaboration endpoints
- Implement Cisco Unified Communications Manager provisioning features
- Integrate and troubleshoot Cisco Unified Communications Manager with Lightweight Directory Access Protocol (LDAP) for user synchronization and user authentication
- Earn 64 credits toward recertification
This exam is for:
- Systems engineers
- Network engineers
- Students preparing to take the CCNP Collaboration certification
- Network administrators
NEW QUESTION 21
Refer to the exhibit.
This INVITE is sent to an endpoint that only supports G.729. what must be done for this call to succeed?
- A. Nothing; both sides support payload type.101.
- B. Noting; both sides support G.729.
- C. Add a transcoder that supports G.711ualw and G.729.
- D. ADD a media termination point that supports G.711ulaw and G.729.
Answer: C
NEW QUESTION 22
Users want their mobile phones to be able to access their Cisco Unity Connection mailboxes with only having to enter their voicemail pin at the login prompt when calling the pilot number. Where should an engineer configure this feature?
- A. alternate extensions
- B. transfer rules
- C. greetings
- D. message settings
Answer: C
Explanation:
Section: Collaboration Applications
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/ guide/10xcucsagx/10xcucsag170.html
NEW QUESTION 23
In the cisco expressway solution, which two features does mobile and Remote access provide? (Choose two)
- A. the ability for remote users and their devices to access and consume enterprise collaboration applications and services
- B. VPN-based enterprise access for a subset of Cisco Unified IP Phone models
- C. the ability to register third-party SIP or H.323 devices on Cisco UCM without requiring VPN
- D. the ability of Cisco IP Phones to access the enterprise through VPN connection
- E. Secure reverse proxy firewall travelsal connectivity
Answer: A,E
NEW QUESTION 24
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 25
What is a characteristic of video traffic that governs QoS requirements for video?
- A. Video is typically constant bit rate.
- B. Voice and video are the same, so they have the same QoS requirements.
- C. Video is typically variable bit rate.
- D. Voice and video traffic are different, but they have the same QoS requirements.
Answer: C
NEW QUESTION 26
Refer to the exhibit.
An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?
- A. An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.
- B. An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.
- C. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
- D. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
Answer: A
NEW QUESTION 27
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?
- A. Pattern usage, IPv4 pattern, and SIP trunk/Route list
- B. SIP trunk/Route list, description, and IPv4 pattern
- C. Pattern usage, IPv4 pattern, IPv6 pattern, and description
- D. Pattern usage, IPv6 pattern, and SIP trunk/Route list
Answer: A
NEW QUESTION 28
Refer to the exhibit.
An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?
- A. An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.
- B. An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.
- C. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
- D. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
Answer: A
NEW QUESTION 29
Which issue causes slips on a PRI?
- A. incorrect clock source
- B. incorrect encapsulation
- C. change in the line code
- D. incorrectly configured time zone
Answer: A
Explanation:
Section: Infrastructure and Design
NEW QUESTION 30
Endpoint A is attempting to call endpoint B.
Endpoint A only supports G.711 ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media are resources are allocated to normalize packetization rates through transrating?
- A. Software transcoder on Cisco unified Communications manager
- B. Software MTP on Cisco Unified Communication Manager
- C. Hardware transcoder on Cisco IOS Software
- D. Software MTP on Cisco IOS Software
- E. Hardware MTP on Cisco IOS Software
Answer: A,B
NEW QUESTION 31
Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addressing mode be set up in the Cisco Unity Connection?
- A. Set up for each group to use IPv4 and IPv6.
- B. Set up is not required.
- C. Set up IPv4 and IPv6 in cisco Unified CM.
- D. Set up media ports for each port group to use IPv4.
Answer: B
NEW QUESTION 32
Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?
- A. Ask the Cisco UCM administrator to associate the phone to an end user.
- B. Dial the hunt pilot extension and associate the phone to an end user.
- C. Plug the phone into the network.
- D. Dial the self-provisioning IVR extension and associate the phone to an end user.
- E. Enter settings menu on the phone and press *,*,# (star, star, pound).
Answer: B,D
NEW QUESTION 33
A company deploys centralized cisco ucm architecture for a hub location and two remote sites.
The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec Remote site B has a 1 T1 connection to the hub location and calls to and from remote site B use G.729 codec Based on the provided guidance, a Cisco voice engineer must design media resource management for the customer. What is the method that needs to be followed?
- A. configure the hardware transcoder on the site A router.
- B. configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.
- C. configure the hardware transcoder on the hub location router.
- D. configure the hardware transcoder on the site B router.
Answer: C
NEW QUESTION 34
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed.
Where does the engineer go to remove the inactive custom panel?
- A. The In-Room control Editor on the webpage of the MX800
- B. The software Upgrades page in CUCM OS Administration
- C. The SIP Trunk security profile page in CUCM Administration
- D. The phone configuration page in CUCM Administration
Answer: A
NEW QUESTION 35
Refer to the exhibit.
Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt. Why is this happening and how is it fixed?
- A. The Cisco Unity Connection Call Handler is configured for a -Release to Switch" transfer type.
Transfers must be disabled for the Cisco Unity Connection Call Handler. - B. Cisco Unified Border Element is not sending any support for DTMF. DTMF configuration must be added to the appropriate dial peer.
- C. Cisco Unity Connection is configured on G.729 only. Cisco Unity Connection must be reconfigured to support iLBC.
- D. Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SDP.
Answer: B
NEW QUESTION 36
Refer to the exhibit.
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is matched and the translated number is 02553431234.
- B. The translation rule is not matched because DNIS does not end with a "$".
- C. The translation rule is matched and the translated number is 025553431234.
- D. The translation rule is not matched because DNIS contains "-".
Answer: A
NEW QUESTION 37
Where is the default for Maximum Session Bit Rate for a region configured?
- A. Enterprise Phone Configuration
- B. Enterprise Parameters Configuration
- C. Region Configuration
- D. Service Parameter Configuration
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmcfg/ CUCM_BK_A34970C5_00_admin-guide-91/CUCM_BK_A34970C5_00_admin-guide-91_chapter_0111.html
NEW QUESTION 38
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified Communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed.
Where does the engineer go to remove the inactive custom panel?
- A. The SIP Trunk Security Profile page in CUCM Administration
- B. The Software Upgrades page in CUCM OS Administration
- C. The In-Room Control Editor on the webpage of the MX800
- D. The phone configuration page in CUCM Administration
Answer: B
NEW QUESTION 39
What is the major difference between the two possible Cisco IM and Presence high-availability modes?
- A. Balanced mode does not provide user load balancing, but it provides in the event of an outage. Active/ standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
- B. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, and it also provides load balancing.
- C. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
- D. Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby mode provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.
Answer: C
Explanation:
Section: Collaboration Applications
NEW QUESTION 40
Given this H.323 gateway configuration and using cisco best practices, how must the called party transformation pattern to ensure that a proper ISDN type of number is set?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 41
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology? (Choose two.)
- A. device pool
- B. Audio Codec Preference List
- C. physical location
- D. location-based CAC
- E. RSVP-enabled locations
Answer: A,D
Explanation:
Section: QoS
NEW QUESTION 42
Which issue cause slips on a PRI?
- A. incorrect clock source
- B. change in the line code
- C. incorrectly encapsulation
- D. incorrectly configured time zone.
Answer: A
NEW QUESTION 43
How many DNS SRV entries can be defined in the SIP trunk destination address field in Cisco Unified Communications Manager?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Section: Infrastructure and Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/sysConfig/ CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151/CUCM_BK_SE5DAF88_00_cucm- system-configuration-guide-1151_chapter_01110.html
NEW QUESTION 44
......
350-801 Dumps - Pass Your Certification Exam: https://www.pass4cram.com/350-801_free-download.html
Free Sales Ending Soon - Use Real 350-801 PDF Questions: https://drive.google.com/open?id=1FD2n84Dm7_3QmqD-kyndOi_BiAmfCltV