[Oct-2023] HPE6-A73 Braindumps – HPE6-A73 Questions to Get Better Grades
HPE6-A73 Exam Dumps - Try Best HPE6-A73 Exam Questions - Pass4cram
HP HPE6-A73 certification exam is highly respected by IT professionals and employers alike. Aruba Certified Switching Professional Exam certification program is recognized as a leading certification program in the field of network switching, and it is highly valued by employers who are seeking highly skilled and knowledgeable IT professionals. Additionally, the HPE6-A73 certification is a key requirement for many high-level networking jobs, making it an essential certification for IT professionals who are looking to advance their careers in this field.
NEW QUESTION # 14
A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.
Which type of licensing should be used by this customer?
- A. 1 Aruba NetEdit SMB License
- B. 20 Aruba NetEdit permanent licenses
- C. 25 Aruba NetEdit permanent licenses
- D. 20 Aruba NetEdit single node subscription licenses
Answer: D
NEW QUESTION # 15
When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?
- A. Change validation
- B. Conformance validation
- C. Semantic validation
- D. Syntax validation
Answer: A
NEW QUESTION # 16
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?
- A. Requires NetEdit to implement
- B. Provides up to 60W of power per port
- C. Provides surge protection for PoE and non-PoE ports
- D. Supports all AOS-CX switches
Answer: B
NEW QUESTION # 17
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. Downloadable user roles
- B. RADIUS dynamic authorization
- C. IPSec
- D. User-based tunneling
Answer: B
NEW QUESTION # 18
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Enable trust settings for the AOS-CX switch's SSL certificate
- B. Install the script's signature before installing the new script
- C. Remove a script that is no longer used before installing the new script
- D. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
Answer: C
NEW QUESTION # 19
Examine the attached diagram
Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?
- A. Server 2 cannot access the core layer.
- B. Server 1 can access the core layer via both uplinks.
- C. Server 2 can successfully access the core layer via the keepalive link.
- D. Server 1 and Server 2 can communicate with each other via the core layer.
Answer: B
NEW QUESTION # 20
Examine the AOS-CX switch output:
Based on this output, what is correct?
- A. 802.1X authentication was successful, but MAC authentication is yet to start
- B. A local user role was deployed using a ClearPass solution
- C. 802 1X authentication occurred and downloadable user rotes are deployed
- D. Only 802 1X authentication is configured on the port
Answer: C
NEW QUESTION # 21
Examine the attached exhibit.
The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Bidirectional forward detection (BFD)
- B. OSPFv3
- C. Virtual links
- D. Not-so-stubby areas
Answer: C
NEW QUESTION # 22
An administrator is managing a VSX pair of AOS-CX switches An administrator configures the following on the primary AOS-CX switch:
- A. The VLAN is only created on the secondary switch.
- B. The operation is not allowed by the switch and a CLI error is displayed
- C. The VLAN is created on both the primary and secondary switches
- D. The primary switch will erase VLAN 200 from the VSX pair
Answer: C
NEW QUESTION # 23
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By implementing voice VLANs
- B. By placing it in the strict priority queue
- C. By implementing weighted fair queueing (WFQ)
- D. By defining device profiles with QOS settings
Answer: A
NEW QUESTION # 24
An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Define a class and policy map withthe correct route type and metrics.
- B. Define the route type and metrics in the OSPF process.
- C. Create a classifier policy with the correct route type and metrics
- D. Create a route map with the correct route type and metrics
Answer: D
NEW QUESTION # 25
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
- B. Enable trust settings for the AOS-CX switch's SSL certificate
- C. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
- D. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
Answer: C
Explanation:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6724/index.html#GUID-2048A4D8-5458-4C00-ACA7-8C392182215E.html
NEW QUESTION # 26
Examine the network exhibit.
A company has a guest implementation for wireless and wired access Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic.
The network administrator has established a GRE tunnel between AOS-CX switcheswhere guests are connected to arouting switch in the DMZ Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: D
NEW QUESTION # 27
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192 168 3 5
- B. 192 168 1 5
- C. 192 168 2 5
- D. 192 1684 5
Answer: A
NEW QUESTION # 28
How js voice traffic prioritized correctly on AOS-CX switches'?
- A. By implementing voice VLANs
- B. By implementing weighted fair queueing (WFQ)
- C. By placing tt in the strict priority queue
- D. By defining device profiles with QOS settings
Answer: A
NEW QUESTION # 29
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. implement replay protection for AAA messages
- B. Define the account to implement change of authorization.
- C. Define the account to implement downloadable user roles
- D. Speed up the AAA authentication process
Answer: D
NEW QUESTION # 30
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Rate limiting and egress queue shaping can be applied globally
- B. Only a traffic rate and burst size can be defined for a queue
- C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- D. Limits can be defined only for broadcast and multicast traffic
Answer: D
NEW QUESTION # 31
Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?
- A. Switch(config }# vlan <VLAN-ID>
Switch(config-vtan-<VLAN*lD>)# voice - B. Switch(config)# vlan <VLAN-ID> voice
- C. Switch(config)# port-access Jidp-group <LLDP-group-name>
Switch(config-Hdp-group)# vlan <VLAN-ID> - D. Switch(config)# port-access role <role-name>
Switch^config-pa-roieW vlan access <VLAN-ID>
Answer: A
NEW QUESTION # 32
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: D
NEW QUESTION # 33
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Change the destination multicast address to 239.1.1.1
- B. Define the 239.0.0.1 stream on the rendezvous point (RP)
- C. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- D. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
Answer: A
Explanation:
MAC/IP overlap. 239.0.0.1 would be the same MAC for 224.0.0.1. 224.0.0.0/24 is always flooded over every port.
NEW QUESTION # 34
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Install the in-service software upgrade (ISSU) feature with clustering enabled
- B. install AOS-CX 6300 or 6400 switches with always-on POE.
- C. Implement VSF on the AOS-CX access switches
- D. Implement VSX on the AOS-CX access switches
Answer: B
NEW QUESTION # 35
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. VALIDATE
- B. EDIT
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION # 36
A network administrator is tasked to set up BGP in the company's network. The administrator is defining an eBGP peering between an AOS-CX switch and a directly-connected service provider. The administrator has configured the following on the AOS-CX switch:
However, when using the "show bgp all summary" command, the state does not display "Established" for the eBGP peer. What must the administrator configure to fix this issue?
- A. router bgp 64500 neighbor 192.168.1.1 ebgp-multihop
- B. router bgp 64500 enable
- C. router bgp 64500 address-family ipv4 unicast neighbor 192.168.1.1 activate
- D. router bgp 64500 neighbor 192.168.1.1 update-source loopback0
Answer: C
NEW QUESTION # 37
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?
- A. It uses the Bellman-Ford algorithm derived from distance vector protocols
- B. It uses the unicast routing table and reverse path forwarding (RPF)
- C. It uses IGMP and calculates a shortest path tree (SPT)
- D. It uses the shortest path first (SPF) algorithm derived from link state protocols
Answer: B
NEW QUESTION # 38
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- B. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
- C. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- D. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
Answer: C
Explanation:
People seem to be confused by inverted mask/wildcard masks. They would be correct for Cisco switches, but AOS-CX does NOT use wildcard masks; "AOX-CX switches do not support wildcard masks - only prefixes or subnet masks - when created ACEs." Cisco: 255.0.255.0 = xx.123.xx.123 AOS-CX: 255.0.255.0 = 123.xx.123.xx
NEW QUESTION # 39
......
Verified HPE6-A73 exam dumps Q&As with Correct 124 Questions and Answers: https://www.pass4cram.com/HPE6-A73_free-download.html
Get New HPE6-A73 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=111WJ7GUctLfW4cLPUMEd6Lqx8_NHpk69