HPE6-A47 Study Guide Latest [Nov 16, 2022] Realistic Verified HPE6-A47 Dumps [Q35-Q52]

Share

HPE6-A47 Study Guide: Latest [Nov 16, 2022] Realistic Verified HPE6-A47 Dumps

HPE6-A47 Questions & Practice Test are Available On-Demand

NEW QUESTION 35
Refer to the exhibit.
Exhibit 1 shows the logical plan, and Exhibit 2 shows the BOM created with IRIS. An architect plans to propose two 5406Rzl switches as a VSF fabric for a campus network core. Which issue with the plan should the architect correct?

  • A. Add stacking modules and cables.
  • B. Add two QSPF+ MP0 SR4 transceivers.
  • C. Change the power supply type.
  • D. Change the v2 modules to v3 modules.

Answer: D

 

NEW QUESTION 36
What is the purpose of Mesh Clusters?

  • A. To cluster mesh APs of the same model together.
  • B. To separate Mesh points from Mesh Portals.
  • C. To ensure that mesh APs with the same VAPs are not in the same cluster.
  • D. To enable mesh APs to join the nearest mesh portal cluster.
  • E. To define a group of mesh APs that create mesh links with each other.

Answer: E

 

NEW QUESTION 37
An architect needs to plan the RF coverage. Which application has the greatest potential impact on RF design?

  • A. print
  • B. voice
  • C. secure web browsing
  • D. email

Answer: B

 

NEW QUESTION 38
How does an Aruba infrastructure calculate a wireless device's location?

  • A. RSSI triangulation
  • B. LBS
  • C. RF Fingerprinting
  • D. GPS
  • E. TDOA

Answer: A

 

NEW QUESTION 39
Which of the following describes a Remote AP provisioned in "Split-Tunnel" Forwarding mode?.

  • A. The user role must have a "Permit" statement in order to locally bridge the traffic.
  • B. The user role must have a "route src-nat" statement to locally bridge the traffic.
  • C. All data and control traffic goes to the controller unsecured.
  • D. Local user traffic first goes to the controller and is then spilt back to the local network.
  • E. The RAP uses PAPI to send data traffic to the controller.

Answer: B

 

NEW QUESTION 40
A customer has very high availability requirements for wireless services. The architect plans to implement clustering on several Aruba Mobility Controllers (MCs).
Which benefit of this feature should the architect explain?

  • A. Clustering enables an AP with a failed MC to reconnect to a new AP after a short bootstrap.
  • B. Clustering enables an AP with a failed MC to operate on its own briefly to ensure seamless connectivity.
  • C. Clustering provides wireless client load balancing and seamless failover for client sessions.
  • D. Clustering provides high stability because one MC is active for all sessions and one is standby for all sessions.

Answer: D

 

NEW QUESTION 41
Read this scenario thoroughly, and then answer each question that displays on the right side of the screen.
An architect proposes these products for a customer who wants a wireless and wired upgrade:
* Aruba 2930M switches at the access layer
* Aruba 5406R switches at the core
* Aruba AP-325s
* Aruba 7205 Mobility Controllers (MCs), deployed in a cluster
* Aruba Mobility Master (MM)
* Aruba ClearPass Cx000V
* Aruba AirWare
The architect also needs to propose a security plan for the solution. The customer has 900 employees and up to
30 guests a day. The customer wants to protect the internal perimeter of the network with authentication and
simple access controls. The customer is most concerned about wireless security, but also wants to ensure that
only trusted users connect on the wire. However, the customer also wants all wired traffic to be forwarded
locally on access layer switches. The customer already has a third-party firewall that protects the data center.
The customer wants to use certificates to authenticate user devices, but is concerned about the complexity of
deploying the solution. The architect should recommend a way to simplify. For the most part users connect
company-issued laptops to the network. However, users can bring their own devices and connect them to the
network. The customer does not know how many devices each user will connect, but expects about two or
three per-user. DHCP logs indicate that the network supports a maximum of 2800 devices.
Refer to the provided scenario. Based on the plan for wired authentication, what is a correct plan for wired
user VLANs?

  • A. configure the same roles on switches and MCs to place wired and wireless users in the same VLANs.
    Extend VLANs from access layer switches to the core.
  • B. specify the VLANs in network policies on AirWare, and ensure that both the switches and MCs are
    managed by AirWare
  • C. assign wired users to different VLANs from wireless users, based on port or role assignments on access
    layer switches. Extend the VLANs to the core.
  • D. use the MCs to assign wired users to their VLANs, and extend the VLANs to a Layer 3 switch
    connected to the MC

Answer: C

 

NEW QUESTION 42
An architect simulates VoIP calls and tests the throughput as 67 Kbps, packet loss as 0.3 percent, maximum latency as 100 ms, and maximum jitter as 100 ms.
Which issue typically causes a poor experience for users?

  • A. the packet loss
  • B. the latency
  • C. the jitter
  • D. the throughput

Answer: C

 

NEW QUESTION 43
The customer has an office environment with users who have laptops that can connect with wired or wireless.
Users also bring one or two of their own devices. An architect creates a proposal with Aruba AP-325s, 7210 Mobility Controllers (MCs), a Mobility Master (MM), and Aruba 2930M switches at the access layer to support the laptops and APs.
The architect plans to recommend 802.1X authentication without tunneled node on Aruba 2930M switch ports that connect to laptops. What is one advantage of this form of authentication?

  • A. prevents users from connection attempts with more than three devices
  • B. ensures that Aruba firewall policies apply to wired user traffic.
  • C. provides a second layer of protection for wireless users at the internal perimeter
  • D. enables user access control and ensures only authorized users connect.

Answer: D

 

NEW QUESTION 44
Which benefit does Aruba AirWare Clarity provide to customer IT staff?

  • A. maps all network devices, including APs, MCs, switches, and client devices, and provides information
    about each node
  • B. create a heat map of RF coverage, shows places with interfaces, and helps staff pinpoint the interference
    source
  • C. assesses times for clients to obtain DHCP and DNS services to help staff diagnose non-WiFi related
    issues
  • D. provides insight into the security posture of clients connected to the network, whether wired or wireless

Answer: C

 

NEW QUESTION 45
An Aruba wireless solution for a very high density (VHD) wireless solution consists of a Mobility Master (MM) and two Mobility Controllers (MCs). What is the best practice design for routing the wireless traffic?

  • A. The MCs act at Layer2, and core routing switches act as the default gateway.
  • B. The MCs provide the default gateway services for wireless devices and use static routers.
  • C. The MCs provide the default gateway services for wireless devices and use OSPF.
  • D. The MCs act at Layer2, and the MM acts as the default gateway.

Answer: D

 

NEW QUESTION 46
An architect proposes an Aruba solution with a hardware Mobility Master (MM) to a customer. The customer
has a disaster recovery site which is connected to the main site at Layer 3. The customer requires the MM to
remain available in case of a total site failure.
Which plan meets the customer requirements?

  • A. Deploy a hardware MM to the disaster recovery site and set up VRRP between them.
  • B. Deploy a hardware MM to the disaster recovery site and set its IP address as the standby master for
    MCs.
  • C. Deploy the virtual MM (VMM) to the disaster recovery site and set the VMM IP address to the same
    address as the hardware MM.
  • D. Deploy the virtual MM (VMM) to the disaster recovery site and configure clustering on the hardware
    and software appliances.

Answer: A

 

NEW QUESTION 47
Refer to the exhibit.

An architect determines that 80 Gbps bandwidth is required for the link aggregation between the Building
1aggregation layer and Building 2. Which transceivers should the architect recommend for each pair of switches?

  • A. eight SPF+ LR
  • B. eight SFP+ SR
  • C. two QSPF+ BiDi
  • D. two QSPF+ MPO

Answer: D

 

NEW QUESTION 48
For which scenario does the Aruba backplane stacking technology meet the needs?

  • A. The customer needs to deploy a pair of aggregation switches in the same closet, and wants to simplify the architecture and redundancy design.
  • B. The customer needs to deploy a switch at a branch office and have the switch automatically discover and join the network stack at the main office.
  • C. The customer needs to simplify the deployment of core switches which are located in different closets for redundancy purposes.
  • D. The customer needs to expand the network and make it possible for the current core switches to support more MAC forwarding and ARP entries.

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 49
Refer to the exhibit.

The customer requires fast failover if any one link or core device fails. Which additional technology should the architect plan on the core VSF fabric to meet these criteria?

  • A. OSPF graceful restart
  • B. VRRP
  • C. SmartLink
  • D. BGP

Answer: D

 

NEW QUESTION 50
An architect needs to plan 802.11ac wireless deployment for an office environment with a mix of closed offices and cubicles. The coverage area is approximately 4,645 square meters (approximately 50,000 square feet) and has 350 users. The employees use the wireless network for typical office applications, such as email, Web, printing, and accessing shared files and datacenter services.
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?

  • A. 5-10
  • B. 10-15
  • C. 20-25
  • D. 40-45

Answer: D

 

NEW QUESTION 51
A financial institution has an Aruba wireless system. Each floor is 19 meters by 23 meters (200 feet by 250 feet) and has 20 APs. The organization now requires dedicated Air Monitors (AMs). About how many AMs should the architect recommend per floor?

  • A. about 3 to 5 per floor
  • B. about 16 to 20 per floor
  • C. about 1 or 2 per floor
  • D. about 10 to 12 per floor

Answer: C

 

NEW QUESTION 52
......

Valid HPE6-A47 Exam Dumps Ensure you a HIGH SCORE: https://www.pass4cram.com/HPE6-A47_free-download.html

Pass HPE6-A47 Exam with Latest Questions: https://drive.google.com/open?id=1V9TIy8TUY4V4EHeBSWm7k6gfV3TOo2Eg