D-RP-OE-A-24 Actual Questions - Instant Download 64 Questions
Download Free Latest Exam D-RP-OE-A-24 Certified Sample Questions
EMC D-RP-OE-A-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 11
An administrator ran the balance_load command on a RecoverPoint cluster during a high-load issue. However, the administrator forgot to capture the output. Where can the RecoverPoint Cluster Load report be located?
- A. In the output from the events_log
- B. https://Cluster_Management_IP/info/long_term_statistics
- C. https://Cluster_Management_IP/info/load_balancing/
- D. In the output from running the "Collection System Information" wizard
Answer: C
Explanation:
After running the balance_load command on a RecoverPoint cluster, if the administrator did not capture the output, the RecoverPoint Cluster Load report can be found at the specific URL provided by the RecoverPoint management interface.The correct URL format to access this report is
https://Cluster_Management_IP/info/load_balancing/, where Cluster_Management_IP is replaced with the actual IP address of the RecoverPoint cluster management interface1.
The steps to locate the report are
NEW QUESTION # 12
What is determined by setting the priority level on a Consistency Group (CG)?
- A. Amount of bandwidth allocated to the CG in relation to all other CGs using the same primary RPA
- B. CG(s) that requires the most resources from the primary RPA, regardless of other system activity
- C. Order in which the CG will begin replication in the event a failover occurs
- D. Amount of time before sending an automated notification stating a watermark has been reached
Answer: A
Explanation:
The priority level of a Consistency Group in Dell RecoverPoint is used to manage bandwidth allocation among multiple CGs that share the same primary RecoverPoint Appliance (RPA). Here's how it works:
* Priority Level Setting: The priority level is set within the CG's settings, indicating its importance relative to other CGs.
* Bandwidth Allocation: The higher the priority level, the more bandwidth is allocated to that CG when bandwidth is limited.
* Resource Management: This setting helps ensure that critical CGs receive the necessary resources for replication, especially during peak times or when system resources are constrained.
* Replication Efficiency: By managing bandwidth allocation through priority levels, RecoverPoint can maintain efficient replication and meet Recovery Point Objectives (RPOs) for all CGs1.
This feature is particularly important in environments with multiple CGs and limited bandwidth, as it allows administrators to ensure that the most critical data is replicated first1.
NEW QUESTION # 13
A storage administrator is selecting Test a Copy to enable an Image Access for an XtremIO-to-XtremIO Consistency Group. Why is Logged Access the only allowable access mode with this type of replication?
- A. XtremlO cannot process the changes to the Journal required for Virtual Access
- B. XtremlO snapshots are not host accessible when using RecoverPoint
- C. Direct Access is not possible because the copy cannot be mounted on XtremIO
- D. XtremlO uses snapshots which are instantly promoted as the SCSI personality of the copy
Answer: D
Explanation:
* Snapshot Technology: XtremIO arrays use snapshot technology that allows for quick access to data at a specific point in time.
* Logged Access Mode: When using RecoverPoint with XtremIO arrays, Logged Access mode is used because it leverages the snapshot capabilities of XtremIO.
* Instant Promotion: The snapshots created by XtremIO are instantly promoted as the SCSI personality of the copy, making them immediately accessible to the host.
* Efficiency: This process is efficient because it does not require the Journal to roll forward or backward, which would be necessary for other access modes like Virtual Access.
This capability is part of what makes XtremIO an effective storage solution for environments requiring rapid access to multiple data points for testing, development, or recovery purposes12.
NEW QUESTION # 14
What is the purpose of the save_settings command?
- A. Create a script file that can later be used to recreate the system configuration
- B. Modify or configure the RecoverPoint configuration backup interval
- C. Commit cluster configuration changes to the repository volume
- D. Preserve the configuration of a RecoverPoint Appliance prior to replacement
Answer: C
Explanation:
The save_settings command in Dell RecoverPoint is used to commit cluster configuration changes to the repository volume. When changes are made to the RecoverPoint cluster configuration, they need to be saved to ensure that they persist across system reboots and are recognized by all nodes in the cluster.The repository volume serves as a centralized storage location for these configurations1.
The process of using the save_settings command is as follows:
* After making configuration changes to the RecoverPoint cluster, the administrator issues the save_settings command.
* The command commits the changes to the repository volume, which is a dedicated space on the storage array for storing system settings.
* This ensures that the configuration changes are preserved and can be accessed by the RecoverPoint Appliances (RPAs) when needed1.
It's important to note that the save_settings command does not create a script file for later use, nor does it modify the configuration backup interval.Its primary function is to ensure that any changes made to the cluster configuration are saved and applied correctly1.
NEW QUESTION # 15
What is the minimum size of a Journal when using Distributed Consistency Groups?
- A. 10 GB
- B. 80 GB
- C. 40 GB
- D. 20 GB
Answer: C
Explanation:
For Distributed Consistency Groups in a Dell RecoverPoint environment, the minimum size required for each journal volume is 40 GB.This is the minimum per copy, which can be a single LUN or multiple LUNs that add up to at least 40 GB1.
The size of the journal is determined by the write change rate of what is being replicated and the protection window required per Consistency Group. A general rule of thumb is about 15-20% of the total amount of data being replicated.For example, if a Distributed Consistency Group (DCG) has production server LUNs totaling
500 GB, then the journal per copy would be about 100 GB following this rule1.
It's important to note that while 40 GB is the minimum, the actual size may need to be larger depending on the specific requirements and write change rate of the environment.The journal size should be sufficient to handle the data changes and provide the necessary protection window1.
NEW QUESTION # 16
Which type of RecoverPoint Consistency Group contains both active and standby production copies?
- A. Distributed Consistency Groups
- B. Any group with multiple remote copies
- C. XtremIO Consistency Groups
- D. MetroPoint Consistency Group
Answer: D
Explanation:
A MetroPoint Consistency Group is a special type of Consistency Group in Dell RecoverPoint that is designed for environments where high availability and disaster recovery are critical. It includes:
* Active Production Copies: These are the primary copies that are actively used in the production environment.
* Standby Production Copies: These copies are on standby and can be activated in case the active production copies fail or need to be taken offline for maintenance.
The MetroPoint Consistency Group allows for continuous data protection and availability across multiple sites, combining the benefits of VPLEX Metro with the third-site replication provided by RecoverPoint1.
NEW QUESTION # 17
Which types of I/O modules can be inserted into Slot1 of a Gen-6 RPA?
- A. 10 GbE copper or dual-stacked DB-9 ports
- B. 10 GbE optical or 1 Gb RJ45 copper
- C. 1 GbE optical or 1 GbE copper
- D. 10 GbE optical or 10 GbE copper
Answer: D
Explanation:
The Dell EMC RecoverPoint Gen6 appliance contains two slots for I/O modules. For Slot1, the supported I/O modules are 10-Gb optical fiber and 10-Gb twisted copper pair.This means that Slot1 can accommodate either
10 GbE optical or 10 GbE copper I/O modules1.
The I/O modules are network interface cards with the following characteristics:
* 10-GB OPTICAL FIBER MODULE: 4 ports, Ethernet network type, supported speed of 10 Gb, wire type of optical fiber (SFP+).
* 10-GB TWISTED COPPER PAIR MODULE: 4 ports, Ethernet network type, supported speed of 10 Gb, wire type of BASE-T twisted copper pair1.
These modules provide the necessary connectivity for the RecoverPoint appliance to manage replication setup and operations, ensuring efficient data protection and disaster recovery capabilities1.
NEW QUESTION # 18
A database team is performing tests against a PIT copy of data. Their write activity is going to exceed the currently allocated amount of space dedicated to Image Access mode.
What should be done to allow testing to continue without disruption to their testing?
- A. Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and add one or more additional Journal volumes. - B. Expand the Journal volume using native array tools.
Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and then select "Expand Journal". - C. Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit, and then increase the reserved image access percentage from 20% - D. Use the config_copy_group= copy= policy image_access_log_size= CLI command
Answer: A
Explanation:
When the database team's write activity is expected to exceed the space allocated for Image Access mode in RecoverPoint, additional Journal volumes need to be added to accommodate the increased write activity. This can be done through the Unisphere for RecoverPoint interface:
* Navigate to Protection: Access the Protection menu in the Unisphere for RecoverPoint.
* Manage Protection: Go to the Manage Protection section.
* Select the Consistency Group (CG): Choose the appropriate CG from the list.
* Select the Copy: Click on the copy that is being used for the Point-in-Time (PIT) testing.
* Edit Journal: Click on the Edit Journal option.
* Add Journal Volumes: Add one or more additional Journal volumes to ensure there is enough space for the write activity during the testing periD.
By adding additional Journal volumes, the database team can continue their testing without disruption due to space limitations in the Image Access mode1.
NEW QUESTION # 19
Which Consistency Group setting is directly affected by the maximum Journal lag setting?
- A. Deduplication
- B. Compression
- C. RPO
Answer: B
Explanation:
The Journal lag in a Dell RecoverPoint system refers to the amount of data that has been written to the production volumes but has not yet been replicated to the remote site or copy volumes. The maximum Journal lag setting affects the RPO because it determines the maximum allowable time or data volume that can pass before the data must be replicated to the remote site to meet the recovery objectives.
Here's how the Journal lag impacts the RPO:
* Journal Lag Definition: Journal lag is the measure of the difference between the most recent write to the production volume and what has been replicated to the copy volume.
* RPO Impact: The RPO is the maximum targeted period in which data might be lost from an IT service due to a major incident. If the Journal lag exceeds the maximum setting, itmeans that the RPO could be breached, as there would be more data at risk of being lost than what is acceptable per the RPO policy.
* Management Actions: Administrators can monitor and manage the Journal lag to ensure that the RPO is maintained. If the lag approaches the maximum setting, actions may be taken to increase replication throughput or address any issues causing replication delays.
In summary, the maximum Journal lag setting is crucial for ensuring that the RPO is met, as it directly influences the amount of data that could be lost in the event of a failure or disaster1.
NEW QUESTION # 20
During the Write phase of RecoverPoint replication, when does the write splitter send an acknowledgement back to the host that initiated the write?
- A. After the Distribution phase has completed
- B. After the splitter has received an acknowledgement from the production LUN
- C. After the splitter has received an acknowledgement from the RPAs
- D. As soon as the splitter receives the write
Answer: B
Explanation:
* RecoverPoint Write Phase:
* In the RecoverPoint replication process, the write splitter plays a crucial role in intercepting writes from the host and forwarding them to both the production storage and the RecoverPoint appliances (RPAs).
* Write Splitter Functionality:
* The write splitter intercepts write I/O requests from the host and splits the I/O to both the production LUN and the RPAs. This ensures that the data is written to both the primary storage and replicated copies.
* Acknowledgement Process:
* During the write phase, the write splitter must ensure that the data is successfully written to the production LUN before acknowledging the write request back to the host.
* This is because the primary concern is ensuring data integrity and confirming that the data is safely stored in the production environment before any replication considerations.
* Detailed Workflow:
* Step 1: Host issues a write request.
* Step 2: The write splitter intercepts the write request.
* Step 3: The write splitter forwards the write to the production LUN and the RPAs.
* Step 4: The production LUN processes the write and sends an acknowledgement back to the write splitter.
* Step 5: Upon receiving the acknowledgement from the production LUN, the write splitter then sends an acknowledgement back to the host.
NEW QUESTION # 21
When replicating a Consistency Group between clusters using XtremlO at each site that are connected through Fibre Channel, what is the maximum throughput per RPA?
- A. 300 MB/s
- B. 150 MB/s
- C. 450 MB/s
- D. 240 MB/s
Answer: A
Explanation:
When setting up replication for a Consistency Group between clusters using XtremIO storage arrays at each site connected through Fibre Channel, the maximum throughput that can be expected per RecoverPoint Appliance (RPA) is 300 MB/s. This throughput is a measure of how much data can be transferred from one site to another per second by each RPA involved in the replication process.
The throughput capacity is important for planning and ensuring that the RecoverPoint system can handle the expected data load during replication activities. It affects the Recovery Point Objective (RPO) and the overall efficiency of the disaster recovery setup.The 300 MB/s figure provides a benchmark for administrators to gauge the performance capabilities of their RecoverPoint system when used in conjunction with XtremIO storage arrays1.
It's important to note that actual throughput can vary based on several factors, including network conditions, the amount of data being replicated, and the specific configuration of the RecoverPoint and XtremIO systems1.
NEW QUESTION # 22
A RecoverPoint administrator needs to add a local copy to three existing Consistency Groups. The RecoverPoint system currently contains 100 Consistency Groups. Each group has one remote copy with 80 replication sets. Each cluster contains eight physical RPAs.
However, the administrator is unable to add all the local copies. What is a cause for this issue?
- A. Consistency Group copy cannot have 1024 volumes within the copy
- B. RecoverPoint system needs to be converted to a RP/EX system to support the extra volumes
- C. Cluster has the maximum number of RPAs and cannot be expanded
- D. Addition of the local volumes will exceed the 16K volume limit per cluster
Answer: D
Explanation:
In a Dell RecoverPoint system, there is a limit to the number of volumes that can be managed within a cluster.If an administrator attempts to add local copies to existing Consistency Groups and the system already contains a significant number of Consistency Groups and replication sets, it is possible that adding more local volumes would exceed the system's volume limit, which is 16,000 volumes per cluster1.
Here's how the volume count could exceed the limit:
* Each of the 100 Consistency Groups has 80 replication sets.
* Assuming each replication set consists of at least one volume, this would already account for 8,000 volumes (100 CGs x 80 volumes each).
* Adding a local copy for each Consistency Group would double the number of volumes, potentially exceeding the 16K volume limit per cluster.
This limitation is in place to ensure system stability and performance.If the limit is exceeded, the administrator will not be able to add additional local copies until the volume count is reduced or the system is reconfigured to stay within the limit1.
NEW QUESTION # 23
After a logical corruption, data on a production volume is inaccessible. As the volume is replicated using RecoverPoint, the administrator decides to use the "Test a Copy and Recover Production" wizard to restore this volume to its state prior to the logical corruption.
What is the correct sequence of steps to complete the recovery activity?
Answer:
Explanation:
Explanation:
A screenshot of a recovery program Description automatically generated with medium confidence
To recover a production volume that has become inaccessible due to logical corruption using RecoverPoint's
"Test a Copy and Recover Production" wizard, follow these steps:
* Select a snapshot prior to the corruption: Identify and choose the appropriate point-in-time image from the Journal that was taken before the corruption occurred.
* Mount the snapshot to a verification host and verify its integrity: Attach the selected snapshot to a non-production host where you can perform checks to ensure the data is consistent and free from corruption.
* Unmount the production volume as the Recovery wizard will overwrite it with the recovery data:
Ensure that the current production volume is not in use because the recovery process will overwrite the existing data with the data from the snapshot.
* Monitor the progress of recovery from the Unisphere 'Manage Recovery' wizard: Use Dell EMC's Unisphere interface to track the recovery process and ensure that the data is being restored correctly.
These steps are based on the standard procedures outlined in Dell RecoverPoint documentation for using the "Test a Copy and Recover Production" wizard to restore volumes to a previous state1.
NEW QUESTION # 24
An administrator wants to integrate Site Recovery Manager (SRM) with RecoverPoint. Where should the RecoverPoint storage replication adapter be installed?
- A. On servers running SRM service only
- B. On a newly installed server
- C. On servers running VCenter only
- D. On the same servers running VCenter and the SRM service
Answer: A
Explanation:
To integrate Site Recovery Manager (SRM) with RecoverPoint, the storage replication adapter is a critical component that allows SRM to manage RecoverPoint replication properly. The installation steps are as follows:
* Identify SRM Servers: Determine which servers are running the VMware Site Recovery Manager
* service.
* Install SRA: Install the RecoverPoint SRA on each of the SRM server hosts at both the recovery and protected sites.
* Verify Installation: Ensure that the SRA is correctly installed and recognized by the SRM service.
* Configure Replication: Use the SRA within SRM to configure and manage replication settings for disaster recovery.
It's important to use the most current version of the SRA to ensure optimal compatibility and available features.The SRA can be downloaded from the VMware website, and the SRA release notes and product documentation should be consulted to determine compatibility with SRM versions1.
NEW QUESTION # 25
A company is using XtremlO for their RecoverPoint environment. They have approximately 100 GB of cumulative changes per day with the change being constant throughout the day. The company has a requirement to roll back 48 hours.
How should the Journals be sized and how should the copy policy be configured to ensure maximum protection with the least amount of storage used?
- A. 40 GB with the "Required Protection Window" set for 2 days
- B. 10 GB with the "Required Protection Window" set for 2 days
- C. 5 GB with the "Required Protection Window" set for 2 days
- D. 200 GB with the "Required Protection Window" set for Default
Answer: D
Explanation:
* Calculate Daily Changes: With 100 GB of cumulative changes per day, the total amount of changes over two days would be 200 GB.
* Determine Journal Size: The Journal size must be large enough to store all the changes for the required rollback periD.Therefore, a Journal size of 200 GB is necessary.
* Set Protection Window: The "Required Protection Window" should be set for 2 days to match the rollback requirement.
* Configure Copy Policy: The copy policy should be configured to ensure that the Journal maintains the point-in-time images for at least 48 hours.
By following these steps, the company can ensure maximum protection with the least amount of storage used, while also meeting their rollback requirements1234.
NEW QUESTION # 26
A storage administrator wants to protect their distributed VPLEX volumes using the RecoverPoint, MetroPoint feature. The administrator wants to know if they need to be aware of any special considerations. What information should be provided to the administrator?
- A. Both VPLEX clusters must have a RecoverPoint cluster connected in order to create a MetroPoint Consistency Group
- B. RecoverPoint does not support replication of distributed VPLEX devices
- C. Set the RecoverPoint Group Policy to enable group writes across RPAs
- D. AIl VPLEX devices at both sites can be protected using MetroPoint, regardless of whether they are local or distributed
Answer: A
Explanation:
When using the MetroPoint feature of RecoverPoint to protect distributed VPLEX volumes, it is essential that both VPLEX clusters have a connected RecoverPoint cluster.This is necessary to create a MetroPoint Consistency Group, which is a configuration that allows for continuous data protection and availability across multiple sites1.
The MetroPoint solution provides a three-site configuration that combines VPLEX Metro (which operates within distances of 5-10ms round-trip time, application dependent) with a third site provided by a RecoverPoint appliance.This setup ensures that data is continuously available and protected, and it allows for failover between two Metro sites without impacting protection1.
It's important to note that while MetroPoint enables protection for VPLEX devices at both sites, the requirement for both VPLEX clusters to be connected to a RecoverPoint cluster is crucial for the creation and proper functioning of a MetroPoint Consistency Group1.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly2.
NEW QUESTION # 27
Which tools are listed under "System Analysis and Tools" section of Unisphere for RecoverPoint?
- A. Detect Bottlenecks, Balance Load, Collect System Information
- B. Users and Security, Configure System Reports and Alerts, Change Security Level
- C. Users and Security, Configure System Reports and Alerts, Collect System Information
- D. Detect Bottlenecks, Balance Load, Configure System Reports and Alerts
Answer: A
Explanation:
Under the "System Analysis and Tools" section of Unisphere for RecoverPoint, the tools listed are designed to assist administrators in analyzing and optimizing the RecoverPoint system. The tools include:
* Detect Bottlenecks: This tool helps identify any performance bottlenecks within the RecoverPoint system. It analyzes the flow of replication data and points out areas where there might be congestion or delays, allowing administrators to take corrective actions.
* Balance Load: The Balance Load tool is used to evenly distribute the workload across the RecoverPoint Appliances (RPAs) to prevent any single RPA from becoming a performance bottleneck. This ensures that the system operates efficiently and that replication tasks are completed in a timely manner.
* Collect System Information: This tool gathers comprehensive information about the RecoverPoint system's configuration and operation. It is useful for troubleshooting issues, performing system audits, and preparing for support calls or maintenance activities.
These tools are integral to maintaining the health and performance of the RecoverPoint environment and are accessible through the Unisphere for RecoverPoint interface1.
NEW QUESTION # 28
If a RecoverPoint Consistency Group consists of three production volumes and each has two remote copies, how many replication sets will be contained in this group?
- A. 0
- B. 1
- C. 2
Answer: C
NEW QUESTION # 29
Which factor affects the time it takes a Consistency Group to complete the first-time initialization?
- A. Number of RPAs at the remote copy cluster
- B. Performance of the Journal volumes at the remote copy
- C. Distance between the production and remote copy clusters
- D. Number of RPAs at the production cluster
Answer: B
Explanation:
The performance of the Journal volumes at the remote copy can significantly affect the time it takes for a Consistency Group to complete the first-time initialization. The Journal volumes are where all the changes to the protected volumes are recorded before they are replicated to the remote site.If the Journal volumes are performing poorly, due to issues like high latency or low IOPS (Input/Output Operations Per Second), it can slow down the initialization process as the system struggles to record and replicate the data efficiently1.
Other factors such as the distance between the production and remote copy clusters and the number of RecoverPoint Appliances (RPAs) at both the production and remote copy clusters can also influence the initialization time. However, these factors typically affect the ongoing replication performance rather than the initial synchronization.The number of RPAs can impact the system's ability to process and replicate data, but the most direct impact on initialization time is the performance of the Journal volumes, as they are the bottleneck in the data recording process1.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly1.
NEW QUESTION # 30
A RecoverPoint administrator is using the CLI to create a new Consistency Group. After beginning the process by running the command create_group, what is the next command that needs to be run?
- A. add_replication_volume
- B. create_production_copy
- C. create_replication_volume
- D. add_group_set
Answer: A
Explanation:
When using the CLI to create a new Consistency Group in RecoverPoint, after initiating the process with the create_group command, the next step involves adding volumes to the group. The add_replication_volume command is used to add a volume to a Consistency Group as a replication volume.This command specifies the volume to be replicated and associates it with the newly created group1.
The sequence of commands would typically follow this pattern:
* Run create_group to initiate the creation of a new Consistency Group.
* Run add_replication_volume to add each production volume that needs to be replicated within the Consistency Group.
* Additional commands would follow to configure the properties of the Consistency Group and its replication sets1.
It's important to note that the add_group_set command is used for different purposes, such as grouping multiple Consistency Groups together, and the create_replication_volume and create_production_copy commands are not standard commands in the RecoverPoint CLI for this context1.
NEW QUESTION # 31
A RecoverPoint administrator is adding a new user to the system using Unisphere. Which pre-defined user is used to add a new user?
- A. admin
- B. security
- C. security-admin
- D. boxmgmt
Answer: C
Explanation:
Only users with security permissions can add users, remove and edit permissions for users that have previously been added.--RecoverPoint Management Student Resource Guide
NEW QUESTION # 32
In Unisphere for RecoverPoint, which system analysis tool can verify that Consistency Groups are replicating efficiently or provide recommendations if user action is required?
- A. Detect Bottlenecks
- B. System Notifications
- C. Balance Load
- D. Collect System Information
Answer: A
Explanation:
The "Detect Bottlenecks" tool in Unisphere for RecoverPoint is designed to analyze the performance of Consistency Groups and identify any potential bottlenecks that may be affecting replication efficiency. If the tool detects issues that require user action, it will provide recommendations on how to address them. The steps involved in using this tool are:
* Access Unisphere for RecoverPoint: Log into the Unisphere interface.
* Navigate to System Analysis Tools: Locate the section for system analysis tools.
* Select 'Detect Bottlenecks': Choose this option to start the analysis.
* Review Results: Examine the output for any identified bottlenecks and follow the recommendations provided to resolve any issues and optimize replication performance1.
This tool is an essential part of the RecoverPoint system analysis suite, helping administrators maintain efficient replication and ensure data protection1.
NEW QUESTION # 33
A RecoverPoint administrator wants to add volumes from an unlicensed array to a RecoverPoint/EX cluster.
Which supported RecoverPoint volume type(s) addresses the
administrator's requirement?
- A. Repository only
- B. Repository and Journal
- C. Journal only
Answer: B
Explanation:
In a RecoverPoint/EX cluster, the administrator can add volumes from an unlicensed array as a repository volume.The repository volume is used for internal RecoverPoint operations, such as storing metadata and system information necessary for the RecoverPoint cluster to function1.
The repository volume does not require a license as it is not part of the data replication path and does not store user data. This allows the administrator to utilize storage from an unlicensed array for this purpose.However, for journal and copy volumes, which are directly involved in data protection and replication, a licensed array is required to ensure proper functionality and support1.
It is important to note that while the repository can be on an unlicensed array, all other volumes involved in replication (such as journal and copy volumes) must be on licensed arrays.This ensures compliance with licensing agreements and enables full support and functionality of the RecoverPoint system1.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly1.
NEW QUESTION # 34
A storage administrator has one production site and one remote site. The administrator configured the RecoverPoint with VNX(SE) cluster at both sites. The current environment has two Consistency Groups configured with two copies each; one production copy and one remote copy.
Based on the company's growing business requirements, the
administrator has been asked to keep a local copy of the production data.
Which action should occur in order to meet this requirement?
- A. Upgrade the RecoverPoint with VNX(SE) license to RecoverPoint/EX and then reconfigure the Consistency Group
- B. RecoverPoint with VNX(SE) does not support more than two copies in a single Consistency Group
- C. Delete and reconfigure the existing Consistency Group for a local and remote replication
- D. Add a copy into the existing Consistency Group for a local replication
Answer: D
Explanation:
To meet the requirement of keeping a local copy of the production data in a RecoverPoint environment with VNX(SE) clusters, the administrator can add a local copy into the existing Consistency Group. This action does not require deleting and reconfiguring the existing Consistency Group or upgrading the license. Here are the steps:
* Access Unisphere for RecoverPoint: Log into the Unisphere interface for RecoverPoint management.
* Navigate to the Consistency Group: Find the Consistency Group that needs the local copy.
* Add a Local Copy: Use the option to add a copy into the selected Consistency Group.
* Configure the Local Copy: Specify the settings for the local copy, such as the Journal volume and RPO settings.
* Apply Changes: Save the changes to implement the local replication.
This process allows the administrator to enhance the data protection strategy by adding a local copy for operational recovery or other business needs without disrupting the existing remote replication setup1.
NEW QUESTION # 35
An application protected by RecoverPoint has spanned onto a second XtremlO system. How can this application continue to be protected by RecoverPoint?
- A. Extend the existing Consistency Group onto the second XtremIO system
- B. Encapsulate the application volumes using VPLEX and use the VPLEX splitter
- C. Reconfigure the existing Consistency Group to be a Distributed Consistency Group
- D. Create another Consistency Group and define group sets with periodic parallel bookmarks
Answer: C
Explanation:
When an application protected by RecoverPoint spans onto a second XtremIO system, it is necessary to ensure that the protection extends across both systems. The appropriate action in this scenario is to reconfigure the existing Consistency Group to be a Distributed Consistency Group.This allows for the inclusion of multiple storage systems under the same protection umbrella, ensuring that all parts of the application, even those that span multiple systems, are consistently protected1.
A Distributed Consistency Group in RecoverPoint is designed to maintain synchronous or asynchronous replication across different arrays, which may be geographically dispersed.This ensures that write operations are captured and replicated in a manner that maintains the consistency of the application data, regardless of the underlying storage system1.
For detailed guidance on configuring Distributed Consistency Groups and extending protection to additional storage systems, it is recommended to refer to the official Dell RecoverPoint documentation or contact Dell EMC support for assistance tailored to the specific configuration and version of the RecoverPoint system being used1.
NEW QUESTION # 36
......
Free EMC D-RP-OE-A-24 Exam 2025 Practice Materials Collection: https://www.pass4cram.com/D-RP-OE-A-24_free-download.html
Prepare for your exam certification with our D-RP-OE-A-24 Certified EMC: https://drive.google.com/open?id=1Wru2-0OlkDm8GCR6MmifI096S0AQWSnr