[Aug 31, 2026] Genuine CCFA-200b Exam Dumps New 2026 CrowdStrike Pratice Exam
New 2026 Realistic CCFA-200b Dumps Test Engine Exam Questions in here
NEW QUESTION # 36
You are tasked with creating a group for hosts running Windows 10. What kind of group should you create to make sure all applicable hosts are included in your environment?
- A. Create a static group with the assignment rule criteria for OS Version set to Windows 10
- B. Create a static group with the assignment rule criteria set to OS Type Workstation
- C. Create a dynamic group with the assignment rule criteria set to OS Type Workstation
- D. Create a dynamic group with the assignment rule criteria for OS Version set to Windows 10
Answer: D
Explanation:
The correct choice is to create a dynamic group with assignment criteria set to OS Version = Windows 10 .
Dynamic host groups automatically add hosts when they match the assignment rule and automatically remove hosts when they no longer match. This is the correct group type when the requirement is to continuously include all applicable hosts across the environment without manual maintenance. Falcon's host group documentation states that dynamic groups can use attributes such as grouping tags, IP/CIDR range, OS version, Active Directory OU, and hostname prefix or suffix, and that matching hosts are automatically added. Static groups would require manually adding each Windows 10 host and would not automatically include newly deployed Windows 10 systems. OS Type Workstation is also insufficient because it identifies a device type, not a specific operating system version. Reference topics: Group Creation, Dynamic Host Groups, Assignment Rules, OS Version Filtering.
NEW QUESTION # 37
What impact does disabling detections on a host have on an API?
- A. Endpoints with detections disabled will not alert on anything for 24 hours (by default) or longer if that setting is changed
- B. DetectionSummaryEvent stops sending to the Streaming API for that host
- C. Endpoints with detections disabled will not alert on anything until detections are enabled again
- D. Endpoints cannot have their detections disabled individually
Answer: B
Explanation:
Disabling detections on a host will stop the DetectionSummaryEvent from sending to the Streaming API for that host. This means that the host will not send any detection events to the Streaming API, which is used to stream data from the Falcon Cloud to external applications or systems. The other options are either incorrect or not related to disabling detections on a host.
NEW QUESTION # 38
Your organization wants to monitor the use of remote access software that is currently authorized. The executable is called remote.exe. How would you trigger a detection for review of any process named remote.
exe?
- A. Write an IOC for remote.exe
- B. Write an IOA rule to monitor process creation of .*\\remote\.exe
- C. Create an exclusion for remote.exe and set a workflow to email you every time the exclusion is used
- D. Write a scheduled search looking for ProcessRollup2 events for remote.exe
Answer: B
Explanation:
The correct approach is to create a custom IOA rule that monitors process creation matching .*\\remote\.exe.
The goal is to generate a detection for review when an authorized remote access executable runs. Custom IOAs are specifically suited for detecting organization-specific behaviors, including process creation based on executable path or command-line patterns. An exclusion would suppress detections, not create them. A scheduled search may find process events after the fact, but it does not create a Falcon detection in the same way a custom IOA does. An IOC for remote.exe would be less precise unless based on a hash and would not express the behavioral "process creation" condition. The course guide identifies custom IOA process creation rules as the correct tool for this use case.
NEW QUESTION # 39
You have determined that you have numerous Machine Learning detections in your environment that are false positives. They are caused by a single binary that was custom written by a vendor for you and that binary is running on many endpoints. What is the best way to prevent these in the future?
- A. Using IOC Management, add the hash of the binary in question and set the action to "Allow"
- B. Using IOC Management, add the hash of the binary in question and set the action to "Block, hide detection"
- C. Using IOC Management, add the hash of the binary in question and set the action to "No Action"
- D. Contact support and request that they modify the Machine Learning settings to no longer include this detection
Answer: A
Explanation:
to match any number of characters including none while not matching beyond path separators (\ or /) and double asterisks are used to recursively match zero or more directories that fall under the current directory.
NEW QUESTION # 40
You have created a Sensor Update Policy for the Mac platform. Which other operating system(s) will this policy manage?
- A. Windows
- B. Only Mac
- C. *nix
- D. Both Windows and *nix
Answer: B
Explanation:
A Sensor Update Policy for the Mac platform will only manage Mac operating systems. Sensor Update Policies are platform-specific, meaning that they only apply to hosts that have the same operating system as the policy. For example, a Sensor Update Policy for Windows will only manage Windows hosts, and a Sensor Update Policy for Linux will only manage Linux hosts. You cannot create a Sensor Update Policy that manages multiple operating systems at once.
NEW QUESTION # 41
Why is it important to know your company's event data retention limits in the Falcon platform?
- A. Your query will require you to specify the data pool associated with the date you wish to search
- B. This is not necessary; you simply select "All Time" in your query to search all data
- C. Data such as process records are kept for a shorter time than event data
- D. You will not be able to search event data into the past beyond your retention period
Answer: D
Explanation:
It is important to know your company's event data retention limits in the Falcon platform because you will not be able to search event data into the past beyond your retention period. The retention period is the amount of time that event data is stored in the Falcon Cloud, and it may vary depending on your subscription plan and settings. The other options are either incorrect or not related to knowing your retention limits.
NEW QUESTION # 42
Excluding mobile devices, what kind of hosts can be contained in Falcon?
- A. Windows and MacOS hosts running the falcon sensor
- B. Windows, Linux, or MacOS hosts running the Falcon sensor
- C. Windows, Linux, and container hosts running the Falcon sensor
- D. Windows and Linux hosts running the Falcon sensor
Answer: D
NEW QUESTION # 43
Which of the following applies to Custom Blocking Prevention Policy settings?
- A. You can only blocklist hashes via the API
- B. Blocklisting applies to hashes, IP addresses, and domains
- C. Executions blocked via hash blocklist may have partially executed prior to hash calculation process remediation may be necessary
- D. Hashes must be entered on the Prevention Hashes page before they can be blocked via this policy
Answer: D
Explanation:
Falcon allows you to upload hashes from your own black or white lists. To enabled this navigate to the Configuration App, Prevention hashes window, and click on "Upload Hashes" in the upper right-hand corner. Note that you can also automate the task of importing hashes with the CrowdStrike Falcon?API.
NEW QUESTION # 44
After successfully installing Falcon on a new employee's laptop, you notice that the machine is assigned the default prevention policy instead of the custom prevention policy you created. You verify that the Falcon sensor is functioning properly, and you confirm that the custom policy is enabled and successfully running on more than 1,000 other Falcon hosts.
What is the likely cause of this issue?
- A. A host-based firewall rule is preventing the custom policy from applying successfully
- B. A prompt to apply the new prevention policy was manually declined
- C. The laptop is not a member of a host group assigned to the custom policy
- D. Falcon requires a 24- hour waiting period to apply custom policies to newly installed hosts
Answer: C
NEW QUESTION # 45
When a user initiates a sensor installs, where can the logs be found?
- A. %LOCALAPPDATA%\Logs
- B. %SYSTEMROOT%\Temp
- C. % LOCALAPP D ATA%\Temp
- D. %SYSTEMROOT%\Logs
Answer: B
Explanation:
When a user initiates a sensor install, the logs can be found in %SYSTEMROOT%\Temp. This folder contains temporary files and folders created by the system or applications, including the sensor installation logs. The sensor installation logs have names that start with CSFalconContainer and end with .log, such as CSFalconContainer-2023-08-31_11-23-21.log.
These logs can help you troubleshoot any issues or errors that may occur during the sensor installation process.
NEW QUESTION # 46
The Falcon sensor uses certificate pinning to defend against man-in-the-middle attacks. Which statement is TRUE concerning Falcon sensor certificate validation?
- A. HTTPS interception should be enabled to proceed with certificate validation
- B. SSL inspection should be configured to occur on all Falcon traffic
- C. Common sources of interference with certificate pinning include protocol race conditions and resource contention
- D. Some network configurations, such as deep packet inspection, interfere with certificate validation
Answer: D
Explanation:
The statement that some network configurations, such as deep packet inspection, interfere with certificate validation is true concerning Falcon sensor certificate validation. The Falcon sensor uses certificate pinning to defend against man-in-the-middle attacks, which means that it verifies that the server certificate presented by the Falcon cloud matches a hard-coded certificate embedded in the sensor. Some network configurations, such as deep packet inspection, SSL inspection, or HTTPS interception, may attempt to modify or replace the server certificate, which will cause the sensor to reject the connection and generate an error.
NEW QUESTION # 47
Where in the Falcon platform can you confirm the sensor build version installed on a particular host?
- A. Sensor Downloads page by filtering for a sensor build and selecting the host
- B. Host Management page by filtering for and selecting the host
- C. Dashboards by viewing the Executive Summary Dashboard
- D. Tool Downloads page by downloading the Sensor Reporting Tool
Answer: B
NEW QUESTION # 48
Your development team is working on a new enterprise application, but Falcon starts creating alerts during testing. The alert points to, "C:\Users\Bob\DevCode\felix.dll". In the detection, you see that it's triggering only on a specific Falcon IOA. What would be the best course of action for this situation?
- A. Manually turn off the built-in IOA through prevention policies
- B. Create a Custom IOC and set it to "Allow" for "C:\Users\Bob\DevCode\felix.dll"
- C. Create a sensor visibility exclusion for "C:\Users\Bob\DevCode\felix.dll"
- D. Create an IOA exclusion for "C:\Users\Bob\DevCode\felix.dll"
Answer: B
NEW QUESTION # 49
In order to exercise manual control over the sensor upgrade process, as well as prevent unauthorized users from uninstalling or upgrading the sensor, which settings in the Sensor Update Policy would meet this criteria?
- A. Sensor version set to N-2 and Bulk maintenance mode is turned on
- B. Sensor version updates off and Uninstall and maintenance protection turned off
- C. Sensor version set to N-1 and Bulk maintenance mode is turned on
- D. Sensor version fixed and Uninstall and maintenance protection turned on
Answer: D
Explanation:
In order to exercise manual control over the sensor upgrade process, as well as prevent unauthorized users from uninstalling or upgrading the sensor, the administrator should set the Sensor version to fixed and turn on the Uninstall and maintenance protection setting in the Sensor Update Policy. This will allow the administrator to specify which sensor version will be used by the hosts using this policy, and also require a maintenance token to uninstall or upgrade the sensor. The other options are either incorrect or not sufficient to meet this criteria.
NEW QUESTION # 50
Your organization has determined that your cybersecurity architect needs to be notified via email whenever Falcon generates detections of a medium severity or higher. Additionally, the architect should be notified about any incidents with a CrowdScore of 1.0 or higher.
What can the Falcon Administrator do to ensure the architect is properly alerted?
- A. Create a new Falcon user for the architect then create and assign a custom Falcon user role so they are automatically notified for the new detections and emails
- B. Create a custom Fusion SOAR workflow to send an email every time a new detection or incident is created
- C. Create a new Falcon user for the architect and assign the Detections and Exceptions Manager role so they are automatically notified for the new detections and incidents
- D. Add the architect's email address to the manage list for detection and incident emails from the General settings menu
Answer: B
NEW QUESTION # 51
......
Grab latest Amazon CCFA-200b Dumps as PDF Updated: https://www.pass4cram.com/CCFA-200b_free-download.html
Updated Official licence for CCFA-200b Certified by CCFA-200b Dumps PDF: https://drive.google.com/open?id=1JM8R-0JJQnsJdV377S_g0f49Kh8kc7TR