300-610 Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling 300-610 Exam Dumps 2025 Newly Released
Cisco 300-610 Exam certification benefits
The Cisco 300-610 Exam is a very important test, of course. If you want to find your dream job, this 300-610 Exam is essential. The Cisco 300-610 Exam is not hard to take, but it's not easy either. It requires both knowledge and skills. In order to pass the Cisco 300-610 Exam, you need to prepare well for the 300-610 Exam. Today competitive computer industry has many IT certification exams and the 300-610 exam dumps are one of them. Wait for the Calendar failed to pool the advance performance. Guaranteed opportunities are correct. So, maybe you will have to face some challenges before you can get these exam certifications. In order to help people like you pass the Cisco 300-610 exam certification exam easily, Cisco 300-610 practice test has compiled a set of questions and answers in this exam certification training material. All questions and answers are very professional and focus on the real exam scenario.
NEW QUESTION # 49
An engineer must design a Cisco UCS environment for a customer The design requires the most efficient use of available bandwidth with active-active uplinks The upstream Cisco Nexus 9000 Series Switch must automatically initiate the port-channel connectivity to the fabric interconnects Which configuration must the engineer choose to meet these requirements?
- A. * fabric interconnects in Ethernet end-host mode
* LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches - B. * fabric interconnects in Ethernet end-host mode
* static port-channel from fabric interconnects and Cisco Nexus 9000 switches - C. * fabric interconnects in Ethernet switching mode
* static port-channel from fabric interconnects and Cisco Nexus 9000 switches - D. * fabric interconnects in Ethernet switching mode
* LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides
/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0
/b_UCSM_Network_Mgmt_Guide_4_0_chapter_011.html
Cisco UCS Fabric Interconnect in Switch Mode with Cisco MDS 9000 Family Fibre Channel Switching Modules When the Cisco UCS Fabric Interconnect is in switch mode, the port channel mode can only be in ON mode and not Active . However, to get the peer wwn information for the Fabric Interconnect, the port channel must be in Active mode.
NEW QUESTION # 50
A customer must install a new Hyperflex Stretched cluster in two sites. Low latency and predictable high performance are the top priorities for this setup due to the extensive usage of data-intensive applications across the cluster. Which HyperFlex storage solution is recommended to meet these requirements?
- A. Hybrid
- B. All-HDD
- C. All-Flash
- D. All-SAN
Answer: C
NEW QUESTION # 51
An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?
- A. Cisco Data Center Network Manager
- B. Cisco UCS Director
- C. Cisco Intersight
- D. Cisco Tetration
Answer: C
Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D
NEW QUESTION # 52
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. vNIC Template Policy
- B. Ethernet Adapter
- C. vNIC Policy
- D. Network Control Policy
- E. Pin Group Policy
Answer: A,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 53
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
- A. type
- B. hostname
- C. preshared key
- D. port number
- E. identifying tag
Answer: B,D
Explanation:
Reference: https://en.wikipedia.org/wiki/ISCSI
NEW QUESTION # 54
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 55
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?
- A. Enhanced Virtual Port Channel
- B. Virtual Port Channel
Answer: A
Explanation:
C. Virtual Port Channel Plus (vPC+) D. Back-to-Back Virtual Port Channel
NEW QUESTION # 56
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A. Cisco Intersight automatically creates an invisible cloud witness.
- B. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
- C. Cisco UCS Manager provides service profile portability across nodes.
- D. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex- hx- series/whitepaper-c11-741999.pdf
NEW QUESTION # 57
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network device and service. The company servers already have been security-hardened and must not have any additional software installed on team. The security policy mandates the use of a secure communication protocol that support authentication and encryption for managing the servers. Which two automation tools must be used to meet these requirements? (Choose two.)
- A. Puppet
- B. Saltstack
- C. Ansible
- D. Chef
- E. CFEngine
Answer: A,B
NEW QUESTION # 58
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 59 
Refer to the exhibit. An engineer is creating a new data center design for a customer. The design must support virtual applications, enhance network resilience, and meet these requirements:
* Extend Layer 2 across all network segments to support endpoint mobility.
* Access switches will support up to 20 GB capacity for north-south and east-west traffic.
* Provide fast convergence during link failures.
* MAC address advertisement will not depend on the control plane.
Which solution must the engineer include in the design between the access and distribution switches?
- A. DVSTB
- B. DMVPN
- C. vPC
- D. BGP-EVPN
Answer: A
NEW QUESTION # 60
An engineer must connect an existing Cisco UCS Fabric Interconnect to an IP-based storage array. The connection must be a port channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic.
Which port type should be used to meet these requirements?
- A. appliance
- B. server
- C. network
- D. uplink
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade- server-chassis/116075-ucs-app-connectivity-tshoot-00.html
NEW QUESTION # 61
A Cisco engineer is configuring MPLS VPN BGP at a customer site that is connected to the provider site by more than one path MPLS VPN BGP Local Convergence link protection is enabled. After the engineer installs the main forwarding path and the redundant backup path within the BGP, they assign a unique route distinguisher to each VRF table on all PE devices that serve as a backup to the link.
What is a prerequisite for this local convergence to work?
- A. BGP must support lossless switchover between operational paths
- B. Interautonomous system option A (back-to-back VRF) is active.
- C. The system is performing a PE-CE link protection on both ends
- D. IP/GRE is enabled.
Answer: A
NEW QUESTION # 62
What is a design consideration when implementing FSPF?
- A. FSPF runs on a per-chassis basis.
- B. FSPF runs only on F Ports.
- C. Routes are based on the distance vector protocol.
- D. Routes are based on the domain ID.
Answer: D
Explanation:
Domain ID: The domain ID is assigned to each FC switch in a fabric and is unique to that switch.
Because the upper FCIDs are reserved for various FC fabric services, such as 0xFFFFFF for broadcast and 0xFFFFFC for name server, the domain ID field restricts the maximum number of FC switches that can be connected in a fabric or VSAN to 239. Routing decisions are made based on domain ID bits of FCID.
NEW QUESTION # 63
Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?
- A. Set 4 Gbps performance buffers
- B. Change the assigned speed to 8 Gbps Auto.
- C. Enable "Only dedicate rate mode
- D. Disable restrictions on oversubscription ratios
Answer: D
Explanation:
Reference:
When restrictions on oversubscription ratios are disabled, the bandwidth allocation among the shared ports is proportionate to the configured speed. (If the configured speed is auto, then bandwidth is allocated assuming a speed of 4 Gbps.) For example, if you have three shared ports configured at 1, 2, and 4 Gbps, then the allocated bandwidth ratio is 1:2:4. In Cisco SAN-OS Release 3.0 and later (or when restrictions on oversubscription ratios are enabled), port bandwidths are allocated in equal proportions, regardless of port speed, so, the bandwidth allocation for the same three ports mentioned in the example would be 1:1:1.
NEW QUESTION # 64
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco ACI Multisite Orchestrator
- B. Cisco UCS Manager
- C. Cisco UCS Director
- D. Cisco DAN Center
Answer: A
NEW QUESTION # 65 
Refer to the exhibit. An engineer must deploy NEW-VRF-001 in the data center. All hosts require full reachability with all other hosts, no matter on which pod the host deployment occurs. Which set of commands must the engineer include in the deployment?
- A. address-family I2vpn evpn
route-target both auto - B. advertise I2vpn evpn
route-taraet both auto - C. route-target both auto evpn
route-target both auto - D. host-reachability protocol bgp
advertise I2vpn evpn
Answer: B
NEW QUESTION # 66
Refer to the exhibit. FCoE is used in the topology between the SAN Storage devices and SAN- Core routers. After noticing traffic drops to hosts accessing SAN-B storage, the engineering team wants to reduce the oversubscription ratio in the topology. Which action must the team take?
- A. Configure QoS to prioritize SAN-A traffic.
- B. Increase the bandwidth between SAN-A and SAN-B Storage toward the SAN-Core devices.
- C. Configure QoS to prioritize SAN-B traffic.
- D. Increase the bandwidth between the SAN-Core and SAN-Edge devices
Answer: B
NEW QUESTION # 67
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port- channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution.
A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
- B. Add an additional FCoE VLAN to the SAN network.
- C. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
- D. Increase the queuing buffer in the port-channel interface connected to the storage array.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/qos/513_n1_1
/b_cisco_nexus_5000_qos_config_gd_513_n1_1
/b_cisco_nexus_5000_qos_config_gd_513_n1_1_chapter_011.html
NEW QUESTION # 68
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 69
A customer needs a design for a new network. VLANs must be dynamically provisioned based on the information received from connected hosts. No Layer 2 or Layer 3 configuration must be performed on the related switch ports.
Which feature must be used?
- A. Network PnP
- B. iPXE
- C. POAP
- D. VM Tracker
Answer: D
Explanation:
This example shows how to enable dynamic VLAN creation:
switch# configure terminal
switch(config)# vmtracker connection conn1
switch(config-vmt-conn)# autovlan enable
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/vm- tracker/configuration/guide/b-cisco-nexus-9000-nx-os-virtual-machine-tracker-configuration- guide-93x/b-cisco-nexus-9000-nx-os-virtual-machine-tracker-configuration-guide-
93x_chapter_011.html
NEW QUESTION # 70
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 71
......
Get 100% Authentic Cisco 300-610 Dumps with Correct Answers: https://www.pass4cram.com/300-610_free-download.html
New Training Course 300-610 Tutorial Preparation Guide: https://drive.google.com/open?id=1uFzaV0guFC_0psDERFEyYUR7bD4fOZOO