2021 300-615 Question Bank: Free PDF Download Recently Updated Questions
300-615 Certification Exam Dumps with 99 Practice Test Questions
Career Opportunities
Passing the Cisco 300-615 exam on the first try will help you get the specialist- and professional-level certificates as well as demonstrate to the current or future employer that you are a specialist in the data center solutions field and worthy of the desired position. Thus, the roles that you can choose from include a Data Center Engineering Telecom Manager, a Data Center Systems Administrator, an Infrastructure Manager, a Data Center Technician, and a Data Center VMware Engineer. If you are thinking about what income to expect, you can imagine a range of $39,000-145,000 per year, depending on your title.
NEW QUESTION 24
Refer to the exhibit.
During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit. Which action resolves the issue.
- A. Insert an SD card into SLOT-2
- B. Configure the RAID that is associated with the card.
- C. Reconfigure the Drive Type from "Removable" to "Non-Removable"
- D. Set SLOT-1 Sync Mode to "Auto"
Answer: C
NEW QUESTION 25
A mission-critical server is connected to site A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
- A. Use route-map to advertise this MAC statically and redistribute with ISIS.
- B. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
- C. Use the otv isis bfd <> command to configure BFD protocol.
- D. Unknown unicast flooding is not allowed.
Answer: B
NEW QUESTION 26
Refer to the exhibit.
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
- A. Reboot the switch
- B. Reboot the guestshell
- C. Resync the database
- D. Recreate the guestshell
Answer: B
NEW QUESTION 27
An engineer troubleshoots a packet flow from an access leaf to a spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 9-15
- B. EVPN Type 0, 9, and 15
- C. EVPN Type 0 and 16
- D. EVPN Type 1-5
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 28
An engineer troubleshoots a fabric discovery failure. Which two requirements about switch connectivity must be verified to solve the problem? (Choose two.)
- A. Leaf nodes must connect to spine nodes only.
- B. A Cisco APIC must be attached to leaf nodes.
- C. Spine nodes must connect to other spine nodes.
- D. A Cisco APIC must be attached to a spine node only.
- E. A Cisco APIC must be dual-attached to two separate spine nodes.
Answer: A,B
Explanation:
Section: Network
NEW QUESTION 29
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure the same HSRP priority between the two switches.
- B. Configure preempt on one of the switches in the HSRP group.
- C. Configure HSRP version 2 on Nexus7K-2.
- D. Configure the correct subnet mask on Nexus7K-1.
Answer: C
NEW QUESTION 30
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- B. Statically configure the target information in the Boot Policy.
- C. Configure a QoS policy on the vNIC.
- D. Configure an MTU size of 9000 on the appliance port.
Answer: B
NEW QUESTION 31
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 32
An engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?
- A. Enable PFC.
- B. Enable LLDP.
- C. Enable ETS
- D. Enable Cisco Discovery Protocol.
Answer: B
NEW QUESTION 33
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)
- A. M-Series module
- B. STORAGE-ENT license
- C. ESSENTIALS license
- D. F-Series module
- E. FCoE license
Answer: D,E
Explanation:
Section: Storage Network
NEW QUESTION 34
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?
- A. Remove the remaining EPGs from the VMM domain.
- B. Migrate all virtual machines in the EPG-1 to different port groups.
- C. Migrate all virtual machines in the EPG-1 to different hypervisors.
- D. Remove the port group manually.
Answer: A
Explanation:
Section: Network
NEW QUESTION 35
An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route covers the DNS server is missing. Which action resolve the issue?
- A. Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the routing table
- B. Configure an IP ARP entry to represent [4]:[0300.0000.00fc.bd00.0309l[32]:[10.10.10.10]/136,n the routing table
- C. Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.
- D. Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table
Answer: C
NEW QUESTION 36
DRAG DROP
Drag and drop the commands from the left onto the correct categories on the right.
Select and Place:
Answer:
Explanation:
Section: Automation
NEW QUESTION 37
Refer to the exhibit.
During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit. Which action resolves the issue.
- A. Insert an SD card into SLOT-2
- B. Configure the RAID that is associated with the card.
- C. Reconfigure the Drive Type from "Removable" to "Non-Removable"
- D. Set SLOT-1 Sync Mode to "Auto"
Answer: C
NEW QUESTION 38
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- B. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- C. Reactivate the zoneset.
- D. Reconfigure the initiator and the target to be in the same zones.
Answer: D
NEW QUESTION 39
When the engineer runs the command, this error is received:
opsengineer@wkst1:/home/auto/bash_scripts$ curl -s -b cookie_file_39422186.txt -X GET -k 192.15.132.101/api/node/class/Tenant.json {"totalCount":"1","imdata":[{"error":{"attributes":{"code":"400","text":"Request failed, (output omitted)"}}}]} Which action resolves the issue?
- A. Modify the URI to 192.15.132.101/api/node/class/fvTenant.json
- B. Change the HTTP verb to POST
- C. Add the -c class Tenant flag to the cURL command
- D. Regenerate the API token object
Answer: A
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/DEVNET-2000.pdf
NEW QUESTION 40
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?
- A. The same Fabric Name value should be used before after wiping all devices.
- B. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- D. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
Answer: C
NEW QUESTION 41
Refer to the exhibit.
An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?
- A. Set the local group number as 300 in the remote data center configuration
- B. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
- C. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
- D. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.p
NEW QUESTION 42
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. event policy-default count 1 time 100
- B. event syslog occurs 10
- C. action 2.0 event-default
- D. event cli match 'configure terminal'
Answer: C
NEW QUESTION 43
Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?
- A. Append action 2.0 event-default to the script
- B. Modify snmp-trap strdata "Configuration changed" to syslog msg Configuration changed
- C. Append action 2.0 cli "conf t" to the script
- D. Modify cli match "conf t" to "snmp match "conf t"
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_12eem.html
NEW QUESTION 44
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolve the issue?
- A. Allocate extra space on a flash drive to extract a system image
- B. Allocate extra space on a flash drive to extract a kickstart image
- C. Use a different kickstart image
- D. Use a different system image
Answer: D
Explanation:
Explanation
Kickstart image verification succeeded. System image has failed.
NEW QUESTION 45
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolve the issue?
- A. Allocate extra space on a flash drive to extract a system image
- B. Allocate extra space on a flash drive to extract a kickstart image
- C. Use a different kickstart image
- D. Use a different system image
Answer: D
Explanation:
Explanation
Kickstart image verification succeeded. System image has failed.
NEW QUESTION 46
Refer to the exhibit. A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager. The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager. Which action should be taken to resolve the issue?
- A. Configure the Filter field with the company
- B. Configure the Filter field with sAMAccountName=$company
- C. Configure the Attribute field with sAMAccountName=$company
- D. Configure the Attribute field with the company
Answer: B
NEW QUESTION 47
Refer to an exhibit.
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
- A. Reload the same system image.
- B. Use the same system image as the kickstart image.
- C. Save the system image in NVRAM.
- D. Load a new system image.
Answer: D
NEW QUESTION 48
Refer to the exhibit. A network engineer deploys scripts to the guest shell of a Cisco Nexus switch. The scripts fail to operate properly due to the limited CPU and file system resources that are assigned by default to the guest shell. The engineer allocated more memory and disk space to the guest shell, but the application continues to fail. Which action resolves the issue?
- A. Redeploy the bash shell
- B. Upgrade the guest shell
- C. Disable and enable bash shell
- D. Reboot the guest shell
Answer: D
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKDCN-2015.pdf
NEW QUESTION 49
......
New 300-615 Exam Dumps with High Passing Rate: https://www.pass4cram.com/300-615_free-download.html
Cisco 300-615 Actual Questions and Braindumps: https://drive.google.com/open?id=1dRNbDrgG7mI6w8hOzxfS9R5dKR_82SjA