100% Reliable Microsoft VMCE2021 Exam Dumps Test Pdf Exam Material
Based on Official Syllabus Topics of Actual Veeam VMCE2021 Exam
NEW QUESTION # 31
Veeam Backup & Replication supports which of the following NetApp Data ONTAP modes?
- A. Both 7-mode and Clustered Data ONTAP
- B. Only NatApp EDGE in 7-Mode
- C. Clustered Data ONTAP only
- D. 7-mode only
Answer: A
NEW QUESTION # 32
If the deduplication settings are changed for an existing job, when will the new settings be applied?
- A. Only when any kind of full backup is created
- B. Only when a new active full backup is created
- C. At the next run of the job
- D. Only when you rescan the repository that stores the backup files
Answer: C
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/backup_copy_settings_storage.html?ver=95 (see note)
NEW QUESTION # 33
Which type of jobs can be sent to tape using a "Backup to Tape" job? (Choose two.)
- A. Replication
- B. Configuration Backup
- C. Backup
- D. Backup Copy
Answer: C,D
NEW QUESTION # 34
Why is it recommended to install Veeam ONE before Veeam Backup & Replication?
- A. Veeam ONE verify that the server where Veeam Backup & Replication will be Installed meets all system requirements.
- B. Veeam ONE is a prerequisite for Veeam Backup & Replication Installation.
- C. Veeam ONE can assess the Infrastructure for potential Issues prior to performing a backup.
- D. It Is recommended to add all of the servers involved in the backup process to Veeam ONE first, and then import the configuration to Veeam Backup & Replication
Answer: C
NEW QUESTION # 35
For general data protection regulation (GDPR) compliance, Veeam can add a location tag to which component?
- A. Cloud gateways
- B. Guest interaction proxies
- C. WAN accelerators
- D. vCenter servers
Answer: D
Explanation:
Veeam Backup & Replication allows you to assign information about locations to the following infrastructure objects:
Virtual infrastructure objects: vCenter Servers, datacenters, clusters and hosts.
Backup infrastructure objects: backup repositories, external repositories, scale-out backup repositories, tape libraries and tape vaults.
Agent management objects: protection groups.
Veeam Cloud Connect for service providers: cloud repositories and hardware plans.
https://helpcenter.veeam.com/docs/backup/vsphere/locations.html?ver=120
NEW QUESTION # 36
Which optional component is used to centrally manage multiple Veeam Backup Servers?
- A. Veeam Cloud Connect
- B. U-AIR
- C. Veeam Backup Search
- D. Veeam Backup Enterprise Manager
Answer: D
Explanation:
https://helpcenter.veeam.com/docs/backup/hyperv/enterprise_manager.html?ver=95
NEW QUESTION # 37
Which of the following suggestions is considered best practices for the Veeam Backup & Replication integration with Dell EMC Data Domain?
- A. Locate the gateway server dose to the deduplication appliance
- B. Ensure parallel processing is disabled for jobs targeting Dell EMC Data Domain backup repository
- C. Ensure the reverse incremental backup method is utilized
- D. Ensure the high compression level is utilized
Answer: C
NEW QUESTION # 38
A backup of a Windows VM running on a Hyper-V Cluster has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?
- A. Migration of VM to VMware host in the same data center
- B. Issues caused by a Windows update
- C. Issues caused by storage data corruption
- D. Migration of VM to Hyper-V host in a different data center
Answer: B
NEW QUESTION # 39
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. SureBackup
- B. Instant VM Recovery with "secure restore"
- C. Virtual disk restore
- D. Instant VM Recovery with "staged restore"
Answer: B
Explanation:
https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100
NEW QUESTION # 40
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The other restore points are weekly full backups, this is expected
- B. You should configure the synthetic full backup to be performed on Mondays instead
- C. The old restore points will be deleted after the new restore chain meets the retention policy
- D. Per VM backup files are enabled in the repository
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/synthetic_full_hiw.html?ver=100
NEW QUESTION # 41
A file on a Linux VM hosted on Hyper-V is corrupted and must be restored. Which of the following restore methods provides the best possible RTO?
- A. Start a virtual lab and boot the Linux VM image in an application group, then copy the file directly from the image to the Linux VM.
- B. File-level restore for Linux is not supported on Hyper-V.
- C. Run Veeam Extract Utility and use "copy to" to download the file locally in a shared folder.
- D. Run Veeam file restore wizard and let it restore through the network.
Answer: C
NEW QUESTION # 42
The director of a business needs a folder of MS Office files restored from the corporate shared drive. This drive sits on a Windows VM backed up by Veeam Backup & Replication. The director wants the files restored to their original location and to replace the original files. What functionality will be used to restore the folder using the Veeam Guest OS restoration wizard?
- A. Restore the files using the "Keep" function. Original files will be untouched.
- B. Restore the files using the "Replace" function. Original files will be removed.
- C. Restore the files using the "Overwrite" function. Original files will be removed.
- D. Restore the files using the "Hold" function. The director can then determine the status of the original and restored files.
Answer: C
Explanation:
https://helpcenter.veeam.com/docs/backup/em/restoring_to_original_location.html?ver=120
NEW QUESTION # 43
A backup administrator must enable guest file system indexing for a backup job of a Linux file server VM. All required credentials are added to the Veeam Backup & Replication server.
VMware tools (VIX) cannot be used due to security regulations. What should be done to make it possible in the following environment?
- A. Use the Linux proxy server as a guest interaction proxy.
- B. Use the Veeam Backup & Replication server as a guest interaction proxy.
- C. Connect the Veeam Backup & Replication server to the VM network.
- D. Connect the ESXi host to the VM network.
Answer: A
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/guest_interaction_proxy.html?ver=120
NEW QUESTION # 44
Which of the following is required to enable Tape Parallel Processing?
- A. The tape drive has multiple tapes
- B. The source repository for the tape job is a Scale-Out Backup Repository
- C. Two tape jobs are processes at the same time
- D. The tape library has multiple drives
Answer: D
Explanation:
https://helpcenter.veeam.com/backup/free/parallel_processing.html
NEW QUESTION # 45
Which file extension are associated with Veeam Backup & Replication? (Choose two)
- A. .bco
- B. .vlb
- C. .vbs
- D. .vhb
- E. .vrb
- F. .vbo
Answer: A,E
Explanation:
BCO - configuration backup file
VRB - reverse incremental backup file
https://powersjo.com/list-of-veeam-file-extensions/
NEW QUESTION # 46
A company wants to ensure that, during a replication failover, database servers boot before the application servers. How can this be accomplished?
- A. Create a disaster recovery template
- B. Create a failover plan
- C. Create a replica mapping
- D. Create a planned failover
Answer: B
NEW QUESTION # 47
Backup jobs are configured to local repositories. Backups must be sent from Site A to the repository on Site B.
The connection between the two sites does not allow a direct backup to complete within the backup window. Which type of job and Veeam components should be used to provide the necessary protection?
- A. A backup copy job and components 2 -> 3 -> 4 -> 6
- B. A backup copy job and components 2 -> 3 -> 6
- C. A backup copy job and components 2 -> 1 -> 3 -> 4 -> 5 -> 6
- D. A backup job and components 1 -> 3 -> 4 -> 6
Answer: A
NEW QUESTION # 48
A Veeam proxy server is configured as follows. No modifications are allowed to the transport mode.
When performing a restore of a thin-provisioned VMware virtual disk on an NFS data store using this proxy server, what transport mode will be used by default?
- A. Direct NFS access
- B. Network
- C. Virtual appliance
- D. Direct SAN access
Answer: A
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/direct_nfs_access_proxy.html?ver=120
NEW QUESTION # 49
In Veeam Enterprise Manager, what granular restoration permission can be set for the Restore Operator role?
- A. Active Directory items
- B. SharePoint items
- C. File items
- D. OneDrive items
Answer: C
Explanation:
Restore Operator: - Access objects from the restore scope on the Machines and Files tabs - Perform restore operations as permitted by the delegation settings https://helpcenter.veeam.com/docs/backup/em/em_about_accounts_and_roles.html?ver=120
NEW QUESTION # 50
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?
- A. Instant disk recovery
- B. VM file restore
- C. Instant VM recovery
- D. Virtual disk restore
Answer: B
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/vmfile_recovery.html?ver=100
NEW QUESTION # 51
A backup administrator needs to move the backup server and configuration database to another location. He has configured a backup server and deployed a Microsoft SQL Server in the target location. Which configuration restore mode should be used?
- A. Planned failover
- B. Migrate
- C. Failover plan
- D. Restore
Answer: B
NEW QUESTION # 52
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- B. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in mirror mode, to a repository on the second site
Answer: D
Explanation:
Explanation
https://www.running-system.com/veeam-version-10-favorite-features-immediate-copy-mirroring/
NEW QUESTION # 53
Exhibit:
Look at the diagram. This daily backup job has been running for over 30 days and no active full backups have been taken since the first run. Which of the following best describes the backup job?
- A. This is a forward incremental backup with Sunday and Wednesday synthetic full, keeping seven restore points
- B. This is a forward incremental backup with transform enabled, keeping four restore points
- C. This is forever forward incremental backup, keeping seven restore points
- D. This is a reverse incremental backup, keeping seven restore points
Answer: D
NEW QUESTION # 54
......
Free VMCE2021 Dumps are Available for Instant Access: https://www.pass4cram.com/VMCE2021_free-download.html
View All VMCE2021 Actual Exam Questions Answers and Explanations for Free: https://drive.google.com/open?id=11yUedrC2FXIbz16r_wvq1M6qtImas1yH