100% Passing Guarantee - Brilliant 300-610 Exam Questions PDF [Nov-2024]
300-610 Dumps 2024 - NewCisco 300-610 Exam Questions
NEW QUESTION # 15
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. FCoE protocol
- B. end-to-end oversubscription ratio
- C. N Port virtualization
- D. type of storage
Answer: B
Explanation:
The number of ISLs required between Cisco MDS switches will depend on the desired end-to-end oversubscription ratio. The storage port oversubscription ratio from a single storage port to multiple servers can be used to help determine the number of ISLs needed for each edge-to-core connection.
NEW QUESTION # 16
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
- A. dedicated compute nodes
- B. HyperFlex Edge support
- C. encryption offload cards
- D. fabric interconnects
Answer: A
Explanation:
Because of VDI VMs are very well deduplicated content, but VDI consumes compute resources.
NEW QUESTION # 17
An engineer must build a VXLAN flood-and-learned network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
- A. MVPN
- B. Bidirectional PIM
- C. PIM sparse mode
- D. PIM SSM
Answer: B
NEW QUESTION # 18
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
- A. identifying tag
- B. port number
- C. hostname
- D. preshared key
- E. type
Answer: B,C
NEW QUESTION # 19
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?
- A. Bash
- B. Perl
- C. Python
- D. YAML
Answer: C
Explanation:
Python is object-oriented and imperative language.
YAML is declarative.
NEW QUESTION # 20
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?
- A. Virtual Port Channel
- B. Enhanced Virtual Port Channel
Answer: B
Explanation:
C. Virtual Port Channel Plus (vPC+) D. Back-to-Back Virtual Port Channel
NEW QUESTION # 21
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
- A. Create a policy map in the default VDC that routes traffic between the VDCs.
- B. Create VRF-aware software infrastructure interfaces.
- C. Cross-connect the ports between the VDCs.
- D. Create interfaces in the VDC that can be accessed by another VDC.
- E. Connect the VDCs to an external Layer 3 device.
Answer: C,E
Explanation:
The Cisco NX-OS software does not support direct communication between VDCs on a single physical device. You must make a physical connection from a port allocated to one VDC to a port allocated to the other VDC to allow the VDCs to communicate.
NEW QUESTION # 22
A Cisco engineer is preparing a service profile template for a design, which consists of 20 x UCS B200M6 blade servers 2 x UCS 6454 Fabric Interconnect in End Host Mode, and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The blade servers are equipped with VIC 1480 adapters The engineer does not configure a vNIC/vHBA placement policy in the service profile and the vNICs and vHBAs are assigned to the vCon in a particular order What is the mapping scheme in which Cisco UCS assigns the vCons based on the type of server and the selected virtual slot?
- A. round robin
- B. network mesh
- C. linear ordered
- D. cross match
Answer: A
NEW QUESTION # 23
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
The port should support management over IP.
Which port type must be used to meet these requirements?
- A. console port
- B. Ethernet port
- C. management port
- D. connectivity management port
Answer: A
NEW QUESTION # 24
Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?
- A. The Cisco UCS fabric Interconnect must be in switch mode.
- B. The Cisco UCS Fabric Interconnect must be in end-host motto.
- C. The VLAN IDs must overlap in both Layer 2 domains.
- D. All of the uplinks most be in one port channel to keep all of the ports active.
Answer: B
NEW QUESTION # 25
An engineer must build a VXLAN flood-and-learn network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees.
Which technology meets these requirements?
- A. MVPN
- B. Bidirectional PIM
- C. PIM SSM
- D. PIM sparse mode
Answer: D
Explanation:
Reference:
flexpod_esxi70_vxlan_evpn_design.html
NEW QUESTION # 26
Refer to the exhibit.
A system administrator needs a solution to manage random packet drops between two Cisco UCS C240 M4 servers The servers are connected to a pair of Cisco Nexus 7009 switches using 10G fibre interfaces Both servers are generating too many east-west traffic flows from TCP-based applications which causes significant latency that impacts the customer Also the transfer of files from Server-1 to Server-2 larger than 10 GB results in multiple retransmits Which design solution resolves this issue?
- A. Apply rate-limit on the server 1 VLAN interface per application flow.
- B. Add a second uplink to each server NIC
- C. Increase the amount of memory m both servers
- D. Connect both servers m the same VLAN
Answer: D
NEW QUESTION # 27
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 28
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 29
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- C. A separate DSCP value must be configured for all FCIP VSAN traffic.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html
NEW QUESTION # 30
Which technology can you use to create separate routing tables for different tenants that are hosted on the same Cisco NX-OS platform?
- A. VRF
- B. vPC
- C. VLANs
- D. Cisco FabricPath
Answer: A
NEW QUESTION # 31
An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-
2208XP I/ O modules. The full bandwidth of the I/O module must be utilized.
Which two elements should be used in this environment? (Choose two.)
- A. eight twinax cables from each I/O module to each fabric interconnect
- B. Cisco UCS VIC 1280
- C. Cisco UCS VIC 1225
- D. Cisco UCS M81KR
- E. four twinax cables from each I/O module to each fabric interconnect
Answer: A,B
Explanation:
2208 has 8 uplinks. VIC 1225 only works on C-Series UCS. M81KR has only 2x10G ports. VIC
1280 has 8x10G ports.
https://www.connection.com/product/cisco-vic-1280-dual-40gb-capable-2nd-gen-virtual-interface- card/ucs-vic-m82-8p/13785476
NEW QUESTION # 32
An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.
Which design resolves this issue?
- A. asynchronous replication between data centers
- B. FCoE tunnel between data center
- C. FCIP tunneling between data center
- D. synchronous replication between data centers
Answer: A
NEW QUESTION # 33
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 34
An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used
{prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389
Which addressing scheme was used in the environment?
- A. Network Address Authority
- B. Fibre Channel ID
- C. Extended Unique identifier
- D. ISCSI Qualified Name
Answer: D
NEW QUESTION # 35
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 36
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 37
......
Free 300-610 braindumps download: https://www.pass4cram.com/300-610_free-download.html
300-610 Dumps for Pass Guaranteed - Pass 300-610 Exam: https://drive.google.com/open?id=1CUonbL8twX0zgWrm3FD_Ae8_Wq17F4eR